Schematic You there?????

[chumbucket]

Send me a e mail chumbaitnj@aol.com

 

[petryshyn]

Re: Schematic You there?????

Done

 

[G DANE]

Re: Schematic You there?????

Once again, I have posted this in outboard, non-repair:<br /><br />Hope your still there, and doing fine. <br /><br />Once in an old post to 12footer you mentioned you could do a schematic for a DVA adapter. If you still have it, I would appreciate a copy very much, as I only have an ordinare digital multimeter. Miss all your good advice.

 

[petryshyn]

Re: Schematic You there?????

Hi G<br />Finally found it....

 

[G DANE]

Re: Schematic You there?????

Thank you very much !!

 

[Reel Poor]

Re: Schematic You there?????

How much ampredge draw can this survive?

 

[petryshyn]

Re: Schematic You there?????

Reel Poor<br /><br />If you are referring to what meter impedance to use, I'd recommend at least a 10 mega-ohms digital meter.

 

[G DANE]

Re: Schematic You there?????

Schematic<br />Will you email me Its concerning the plasma cutter.

 

[petryshyn]

Re: Schematic You there?????

Done. . .

 

[G DANE]

Re: Schematic You there?????

Did I type wrong ??

 

[ColdFire]

Re: Schematic You there?????

Ok... I have to ask how to operate this thing I build it plug it in an then use the auto range ac or dc settings?

 

[Paul Moir]

Re: Schematic You there?????

Autorange DC. Expect up to around 300v and mentally add 1.2v to what you get if that matters at all. 300+VDC is nothing to be fooling with so make sure you don't touch anything while testing. Also, let the capacitor bleed off after you stop the engine - it'll take up to 20 seconds or so depending on your meter and the voltage you're reading.<br /><br />Can't see why it wouldn't work, and it's a lot simpler than mine!