This is my first time to this forum I hope somebody can help me. Here's what I know:
1 updated stator(red)
2 trigger checks good per previous postings
(arond 1250 ohms) for all three leads and common.
3 it ran last year but not perfectly.
4 stator outputs 46 VAC on my fluke meter(I don't have
the adapter for peak voltage) on both the grn/wht
and wht/grn leads.
5 there is no spark at any of the 3 cylinders.
I havefound no documentaton detailing the differeces
between the original stator and the upgrade.
As far as I can tell there is one of two components bad
either the stator on the switch box.
I really appreciate any help you-all can give.
1 updated stator(red)
2 trigger checks good per previous postings
(arond 1250 ohms) for all three leads and common.
3 it ran last year but not perfectly.
4 stator outputs 46 VAC on my fluke meter(I don't have
the adapter for peak voltage) on both the grn/wht
and wht/grn leads.
5 there is no spark at any of the 3 cylinders.
I havefound no documentaton detailing the differeces
between the original stator and the upgrade.
As far as I can tell there is one of two components bad
either the stator on the switch box.
I really appreciate any help you-all can give.