Fuel pump reassembly problems

[imported_KLR]

I have a 1973 Johnson 65 hp outboard that I bought a fuel pump rebuild kit for.
I was in the process of tearing it down while multi-tasking and supervising the family on other projects and did not pay attention how it came apart as well as I should have.
The kit I got was the Sierra 393103 kit and I can't figure out how certain parts fit.
There is a small plastic thumbtack looking piece, a spring and a dime sized plastic piece that is shaped like a frisbee.
I have the manual but there are no pictures or instructions pertaining to the pump and could not find ANY pictures online of the pump to help me. The nearest marine mechanic is about 125 miles away.

I pray that someone on here can shed some light. If not I guess I can order a new complete pump and install.

I think I got my old/new parts mixed up and I believe the thumb tack looking piece is a new piece and the larger frisbee looking piece is one of the old ones, after going back and looking at thre kit I bought it only shows the small tyhumb tack looking piece in the kit and doesnt show the spring and the larger piece.
HELP PLEASE !!!!

 

[Scaaty]

Re: Fuel pump reassembly problems

Try going here and navigating around until you get to the fuel pump for your motor...the drawing should help

http://epc.brp.com/default.aspx?brands=ej&lang=e

 

[RPJS]

Re: Fuel pump reassembly problems

This link may help
http://www.wisnersinc.com/Fishing Info/Rebuilding_fuelpump.htm

 

[imported_KLR]

Re: Fuel pump reassembly problems

Thanks for the tips, neither one helped though. The BRP catalog only shows the fuel pump assb. together which is no help and the other site isnt like my pump at all. Thanks anyways.