Need an exhaust snout for an 89' 125hp Force

[MikDee]

Just as the title suggests, anyone know where I can get one? reasonable.

 

[roscoe]

Re: Need an exhaust snout for an 89' 125hp Force

Mercury dealers sell them pretty reasonable, or keep watching ebay, maybe for months until one pops up.

 

[Bigprairie1]

Re: Need an exhaust snout for an 89' 125hp Force

MikD
...this is a spare one I have off a cracked lower unit. The motor is a 91'/90hp...would this work? (note: I'm not sure if they are different between the 125hp or 90hp units?). Regardless, this is available.
Let me know or send me a PM.

 

[Delta 1]

Re: Need an exhaust snout for an 89' 125hp Force

Are you looking for the part pictured or the one that bolts directly to the bottom of the motor and feeds into the midsection?

 

[MikDee]

Re: Need an exhaust snout for an 89' 125hp Force

Thanks for the replies, It is just the snout that bolts to the cavitation plate that I need.

Big Prarie, I don't know if that will fit? it looks slightly different than mine, I notice you have a 1991 model, with water intakes above the prop, mine has water intakes in front of the prop? guess I could start checking part numbers, and let you know.

 

[Bigprairie1]

Re: Need an exhaust snout for an 89' 125hp Force

MikeD...if you measure up what you've got I will check it against this one.
There seems to be a huge amount of standard parts between the 90/120/125hp motors so that might include this snout item?
Anywhooo, just let me know.

 

[MikDee]

Re: Need an exhaust snout for an 89' 125hp Force

MikeD...if you measure up what you've got I will check it against this one.
There seems to be a huge amount of standard parts between the 90/120/125hp motors so that might include this snout item?
Anywhooo, just let me know.

Check your PM

 

[Delta 1]

Re: Need an exhaust snout for an 89' 125hp Force

If his won't work for ya I have one off an '89 125.