Trailer Roller Stops

[samuels]

I've been trying to locate a pair of new bow stop rollers for my loadrite trailer.I can't get thru to the factory they are always busy.The size is 2 5/8" wide x 3" diameter.Called alot of places but they only have 3 x 3"s.Can anybody help me out?

 

[78ImperialT]

Re: Trailer Roller Stops

will the 3" not fit in the mount?

 

[Knightgang]

Re: Trailer Roller Stops

Sounds like only a 2 5/8 will fit it the mount...

 

[samuels]

Re: Trailer Roller Stops

No it won't.The gap between the bracket is 2 3/4".The 2 5/8" roller is whats in there now from the factory.I e-mailed the factory and have not gotten a response.I found no way to talk to anyone on a phone.

 

[Landscaping Wiz 808]

Re: Trailer Roller Stops

Can you get 3" rollers and shave or cut 3/8" off of it so it'll fit?

BOB

 

[samuels]

Re: Trailer Roller Stops

No I don't access to a lathe anymore.It would be pretty hard to saw straight.Actually the ones that are 3" vary from 3 1/8- 3 1/4.

 

[cpubud]

Re: Trailer Roller Stops

phone # 215-949-0500 in PA. the part # you need is 4025.00 according to there parts cataloge on ther web site.

 

[samuels]

Re: Trailer Roller Stops

I appreciate the number.I gave them a call and that is the right part number for that roller.The lady said she will try to find out what is going on.I told her that is no use in me ordering again if they are going to send me the 3" x 3" roller.Like most places nowdays nobody seems to know anything!

 

[samuels]

Re: Trailer Roller Stops

This is funny.Loadrite just called me and said they haven't sold those rollers in over 15 years but they still have them in their catalog.After talking with them I believe they have a bunch of BOZO's working there!

 

[rentprop1]

Re: Trailer Roller Stops

so now you have to shave one anyways right

 

[samuels]

Re: Trailer Roller Stops

Unless I can find some sitting on a shelf somewhere I'll figure some way to cut them down or put some more money into modifying trailer.Thanks to everyone for their help.

 

[tashasdaddy]

Re: Trailer Roller Stops

why not go with one of these. there is a 2" in there.
http://www.iboats.com/Boat_Trailer_...3275328--**********.979116908--view_id.217569

 

[dingbat]

Re: Trailer Roller Stops

I have the block type bow stop on my Loadrite. I had to put spacers (flat washers) behind the brackets to space them out to accept the standard 3" wide mount.