Anchor line

maharg

Petty Officer 1st Class
Joined
Jan 12, 2010
Messages
204
I am looking at buying this...
3/8 X 150 ft. Nylon Anchor Line

For a 16.5 ft glassport (dry weight is 1800)

Tensile Strength of this line is 3,700lbs.

This should be fine for my boat correct?
 

Summer Fun

Banned
Joined
Mar 2, 2002
Messages
2,251
Re: Anchor line

Yes, I have 1/2 inch rode for my 10ft beam 30ft'er @ 6.700 #'s(dry weight)
So I think you'll be fine with that. :)
 

Summer Fun

Banned
Joined
Mar 2, 2002
Messages
2,251
Re: Anchor line

CJ, He only has a 16ft boat. Where is he going to store 150 of 1/2 inch rode on it ??
 

Chris1956

Supreme Mariner
Joined
Mar 25, 2004
Messages
28,076
Re: Anchor line

3/8" line is prenty strong for that job. Use a shackle and thimble to attach the line to the anchor. Chain is optional on that boat. The anchor should be about 8#, although a lighter one would work as well.
 

HappierWet

Master Chief Petty Officer
Joined
Sep 11, 2008
Messages
839
Re: Anchor line

I prefer a softer nylon that will stretch more for an anchor rode, opposed to a harder ( dacron I think ) line with less stretch for docking lines.:)
Don't forget the chain.;)
 

H20Rat

Vice Admiral
Joined
Mar 8, 2009
Messages
5,204
Re: Anchor line

I prefer a softer nylon that will stretch more for an anchor rode, opposed to a harder ( dacron I think ) line with less stretch for docking lines.:)
Don't forget the chain.;)


I have used anchor rodes that either have a long section of bungi cord, or are entirely bungi. Works surprisingly well, and doesn't have the storage/weight issues of chain. By getting rid of the shock load, it really decreases the need for a chain.

(disclaimer, only works in some instances, obviously you would never tie a 30 footer up overnight with this! i use it for shallow bay anchoring on a river or on the sandbars)
 

cedarjunki

Chief Petty Officer
Joined
Aug 23, 2007
Messages
472
Re: Anchor line

CJ, He only has a 16ft boat. Where is he going to store 150 of 1/2 inch rode on it ??

mines only 18'.
over 300' of 1/2" on board.


but the only reason i prefer it thicker is from dropping/pulling anchor multiple times during the day to change fishing locations.
 

rbh

Fleet Admiral
Joined
Mar 21, 2009
Messages
7,939
Re: Anchor line

I have used anchor rodes that either have a long section of bungi cord, or are entirely bungi. Works surprisingly well, and doesn't have the storage/weight issues of chain. By getting rid of the shock load, it really decreases the need for a chain.

(disclaimer, only works in some instances, obviously you would never tie a 30 footer up overnight with this! i use it for shallow bay anchoring on a river or on the sandbars)

+1, give it a try, I know other people with the same size boat as yours and they love it.
 

dave11

Lieutenant Junior Grade
Joined
Dec 2, 2007
Messages
1,195
Re: Anchor line

That should be just fine. I would add 6 feet of chain.
 

rbh

Fleet Admiral
Joined
Mar 21, 2009
Messages
7,939
Re: Anchor line

With a bungee cord style anchor rode and a light boat there is no need for chain.
You set your ancohor, pull the boat with the stern line, unload what you need and let the boat go out as far as your stern line will allow or there is bungee tension.
Then tie off.
If you need anything pull the boat in. :D
 

grego

Petty Officer 1st Class
Joined
Dec 12, 2008
Messages
328
Re: Anchor line

What is bungee line called, and can i get it from Iboats??
 

Boatist

Rear Admiral
Joined
Apr 22, 2002
Messages
4,552
Re: Anchor line

I would use 5/16 3 strand Nylon for that boat. In Fact I use 5/16 3 strand on my 21 foot boat with 200 feet of line on one of my anchors.
I have anchored in very strong winds and the 4 plus mile per hour currents just inside the golden gate bridge.
 
Top