After reading other questions on this BB, I have the same problems as most of them, but not exactly. I problem is that after putting it in the lake. It starts and idle great, up to about 3500 RPMs ( my tack works like it is supposed to) it runs great. But after that, I can give it full throttle and it stays at 3500 RPMs. I replaced the main/reserve tank valve (cracked) was not the prob. I rebuilt the carbs, nothing wrong with them. New spark plugs. I was able to get it up to about 5500 RPMs one time. After that I put the tube in the water with a person on it, gave it full throttle, it reved up to 5500 but was bearly going any speed at all. I am pretty sure that everything in my full system is OK. Everything else is working right, no warning lights are anything else. I'm about to pull my hair out trying to figure this thing out.
