Evinrude starter problem

[estevenson]

I've got a 1996 150 hp Evinrude Ocean Pro. I tried to start it this morning, and the starter just whines - spinning free. Its not engaging the flywheel. The battery is fine. Do I need a new starter, or solenoid, or can I beat it with a big hammer?<br /><br />Thanks.

 

[Solittle]

Re: Evinrude starter problem

Mine does this once in a while. Either you have crud in an electrical connection or your battery is not fully charged. My bet is on the battery. Check with a volt meter and a hydrometer.

 

[ob]

Re: Evinrude starter problem

Another possibility is that the bendix shaft on the starter needs to be cleaned and lubricated so that it will slide freely and engage the flywheel.

 

[steelespike]

Re: Evinrude starter problem

You may simply need to oil the drive where the gear rides up to ingage the flywheel.<br /> You can turn it up by hand and see where to lube,<br /> wd40 may work for awhile.I prefer something that<br />stays just a little wetter.

 

[estevenson]

Re: Evinrude starter problem

My bet is the bendix shaft - thanks for the advice, I'm going to give it a try.

 

[estevenson]

Re: Evinrude starter problem

Took out the Bendix shaft, cleaned and lubed. That did it. Thanks to all for your help.