'03 90hp Merc-NO SPARK!

[steam_mill]

Re: '03 90hp Merc-NO SPARK!

Here is the update.<br /><br />Picked up the boat at the marina. They replaced another CDM and all is well now.<br /><br />I'll be posting another thread regarding this.<br /><br />Tx.

 

[Boatin Bob]

Re: '03 90hp Merc-NO SPARK!

Hey Joe...sorry to hear about your troubles, glad you got it fixed OK, seems kinda strange one module can affect another? Hope everything is well with your Cutter.

 

[franger]

Re: '03 90hp Merc-NO SPARK!

hey steam mill<br />just finished reading your post and with what i read am assuming the boat/motor in question is a Cutter with a 90 hp. i am currently looking at a 04 Cutter173BowRider with a 90hp merc 2 stroke. if this is similar to your boat, i would appreciate any info on the package, are you happy with it or should i steer clear?

 

[steam_mill]

Re: '03 90hp Merc-NO SPARK!

My cutter is the 171. I think the 173 is a little larger?<br /><br />Anyway, I'm quite happy with the boat. I opted for the 90 as I did not like the 115 with its switching cylinders and it weighs more.<br /><br />The package as a whole is good. The boat is in the water at the cottage from may to september. I run two props a 17" for skiing and 21" for cruising.<br /><br />With the 21" does about 50 mph. Plains at about 22MPH.<br /><br />Easily cruise with 6 adults on board. <br /><br />Mine came with a camper top. Hate it. Takes too long to put up and take down. Had a custom tonneau cover made for it this year and will never by a camper top for a boat again.<br /><br />All said, I'm quite happy with it!<br /><br />Joe