Media added by Buffgunner

Navigation

Browse albums
Gauges installed on dash. When I got the boat, it had a surface mount speedo, located right about where that hole is. Nothing more. My gauge placeme

Gauges installed on dash. When I got the boat, it had a surface mount speedo, located right about where that hole is. Nothing more. My gauge placeme

  • 0
  • 0
Where I put the fuel tank fill (on top of deck) and the tank vent (on side just forward of "GLASTRON")

Where I put the fuel tank fill (on top of deck) and the tank vent (on side just forward of "GLASTRON")

  • 0
  • 0
Casad ski pylon I found on Craigs list for a steal.

Casad ski pylon I found on Craigs list for a steal.

  • 0
  • 0
3/8" aluminum alloy plate transom beef-up.

3/8" aluminum alloy plate transom beef-up.

  • 0
  • 0
Lt side board modified to flip up allowing storage of a 3 gallon aux carry can.

Lt side board modified to flip up allowing storage of a 3 gallon aux carry can.

  • 0
  • 0
Rt side board modified to flip up allowing access to battery.

Rt side board modified to flip up allowing access to battery.

  • 0
  • 0
Rear of GT-150 after tank installation. I need to get a wider curtain. I had to trim the side boards to clear the tank. Yes that crease on the curt

Rear of GT-150 after tank installation. I need to get a wider curtain. I had to trim the side boards to clear the tank. Yes that crease on the curt

  • 0
  • 0
The custom gas tank I had made for the GT-150. It holds 19 - 20 gallons. Normal is a pair of 6 gallon carry cans.

The custom gas tank I had made for the GT-150. It holds 19 - 20 gallons. Normal is a pair of 6 gallon carry cans.

  • 0
  • 0
The problem with tilt tube steering on a GT-150, is the steering rod hits the far side of the motorwell. I made a recess to provide room for full ste

The problem with tilt tube steering on a GT-150, is the steering rod hits the far side of the motorwell. I made a recess to provide room for full ste

  • 0
  • 0
Reconfigured steering. Out with the motorwell mounted tube and in with the tilt tube.

Reconfigured steering. Out with the motorwell mounted tube and in with the tilt tube.

  • 0
  • 0
The '79 Glastron GT-150 my son gave me for my birthday July 2009. The motor is a '74 Evinrude 85 (w/o power trim).

The '79 Glastron GT-150 my son gave me for my birthday July 2009. The motor is a '74 Evinrude 85 (w/o power trim).

  • 0
  • 0
The 2000 Johnson 115 (w/power trim) I won on E-Bay.

The 2000 Johnson 115 (w/power trim) I won on E-Bay.

  • 0
  • 0
Unloading the 115 Johnson from the back of the truck after bringing it home from TN.

Unloading the 115 Johnson from the back of the truck after bringing it home from TN.

  • 0
  • 0
Top