I've been searching for a decent used outboard for my 1998 xpress h51
But have been coming up empty handed. Where do you guys find these at?? I basically live out in the sticks so there is no place around for hours where I could even look. Are there places out there that would ship a motor to...
Re: 1976 Chrysler 90hp 907HB Ignition Troubleshooting
I did some more research, and found some more testing procedures, using a dvm meter I attached the positive lead to the blue wire in the picture, and the negative, to the white wire with the black tracer. rotating the flywheel by hand I...
1976 Chrysler 90hp 907HB W/magnapower ignition
Looking for a little insight here,
Trying to troubleshoot a no spark situation
As per the service manual I have 12-14 volts coming in on the blue wire coming into the preamp,
now out of the preamp while cranking I am varying anywhere from 1.5-6...
Looking for a carb rebuild kit with float for a 1978 evinrude 9.9,
checked here at the iboats store and the only ones I can find are without the float
does such a kit still exist?
The carb I am working on still has the old cork float.
Thanks in advance
Lynn
Just picked up this Evinrude from a friend to do some maintenence (water pump, carb rebuild, etc)
However the identification plate is missing, so I need to know the year so I can order parts.
Here are some pictures:
All,
I am in need of some assistance, I am trying to find a new prop for my outboard. I have looked around and m not sure in what exactly I need I know I want either a 4 blade 12 3/4 X 17 or a 3 blade 13 1/4 X 17. However I see 2 different types of each model, one that requires a hub kit and...
Can someone tell me what the starting point is on the idle/mixture screws on the carbs is?
I thought I read somewhere that it was 5/8 out, is my memory correct?
Hello all,
Recently I got my boat running that I purchased, I drained changed the gear oil before ever taking it out and all looked fine. However after taking it out today I checked the oil and it was pretty milky. I do not see any leaks coming from the prop shaft nor any leaks out of the...
Hello all I have a 1971 Johnson 60hp, I am wanting to test the hot horn can someone tell me how to do this I am attaching a picture of the wiring diagram.
Hello all,
I recently acquired a 1971 glastron with a 1971 johnson 60els71c motor. The problem I am having is that I am getting no spark. Following other posts on the forum, I have checked voltage coming from the ignition to the purple wire going into the amplifier, I have voltage there...
