Recent content by 2MADAKAT

  1. 2

    Oil Injection Removal question

    Motor = 1990 115HP Yamaha ETLD My friend recommended removing the oil injection system from the motor and I agreed as I wanted to run my two stroke kicker from my main gas tank. The oil pump drive shaft was removed, the oil tank in the boat removed and the oil tank on the motor removed. This...
  2. 2

    Windshield Leak Repairs

    The rubber seals on my windshield glass have all separated at the corners and are leaking water into the boat interior causing an annoying musty smell when covered. Has anyone ever filled them or replaced them and if so, what have you used. I really don't want to tear them apart as they are a...
  3. 2

    Looking for plastic for dash

    I am rebulding my dash on my Bayliner and I need a piece of black plastic 2'x 1' by a min of 1/4" thick. I am not having any luck finding something around here to work and wonder if anyone might have some suggestions. I want the black plastic so I don't have to keep on repainting and it hides...
  4. 2

    Urgent Question For Rodbolt

    RODBOLT, I have had a recurring problem with my Yamaha outboard and it has been at our local Yamaha dealer for 4 weeks and they haven't been able to solve the problem. I am entered in a fishing tournament for next weekend and need my boat and wonder if you might be able to help the...
  5. 2

    Mold problem

    I cut a access panel in the floor of my 19' bayliner capri to store oars and water skis. It was painted with a white oil based paint. Unfortunately, water that sits in there from rain, wave action, etc. is creating mold on my equipment. I am considering sanding and repainting with Interlux...
  6. 2

    OIL EMERGENCY SWITCH PROBLEM

    I HAVE A 1990 115HP ETLD MOTOR. I FINALLY SOLVED MY RUNNING PROBLEMS FROM LAST YEAR. IT TOOK A NEW FUEL PUMP, BALL AND HOSE, ONE NEW COIL, AND SPARK PLUGS TO GET IT RUNNING AT 45 MPH AT 55-5800 RPM ON A 19p PROP. MOTOR WAS ORIGINALLY OIL INJECTED AND I HAD REMOVED OIL PUMP DRIVE SHAFT, OIL...
  7. 2

    identifying Yamaha Prop

    I have a 1991 Yamaha 115 ETLD engine. I bought a 17 pitch prop on Ebay and when I put it on my rpm dropped to 3500 max at about 26 - 27 mph. I put my older 19 pitch prop on and I get 4900 rpm max with 37 mph. Is there any website available to find out the specs on props? The 17P prop has...
  8. 2

    What do I go with?

    Ibought a 19.5 bayliner with a 1990 115HP Yamaha<br />on the back. It came with a Mercury Quicksilver<br />Prop, 12-3/4"x21. The best rpm's I could get was<br />4500. <br />I then bought a Yamaha 13-19K prop and ended up buying a new thrust washer and spacer so I could use it. The best rpm's...
  9. 2

    rapala e-mail address

    I want to write a note to Rapala/Normark about one of thier products but I cannot find an e-mail address on their webpage. <br />Anyone ever written them?
  10. 2

    oil injection removal

    What are the proper steps to removing the oil injection system off my 115?<br />Can it cause the alarm on the shifter to go off?
  11. 2

    Propeller installation

    My 1990 115ETLD came with a 21" prop with one of those centres designed to protect lower end by breaking away if you hit something.<br />I bought a Yamaha factory 19" prop. When I went to put it on, it didn't slide all the way into the lower end housing and I was missing a spacer between the...
  12. 2

    BEARING BUDDY REMOVAL

    I have water coming out the front of my bearing<br />buddies and I believe the rear seal needs to be changed because of grease on axle.<br />How do I remove existing bearing buddies to clean<br />up and reseal?
  13. 2

    motor mounting height

    A friend of mine rebuilt the transom on my 1984 Bayliner Capri. While doing so he raised it by<br />3.5". The motor is a 20" Yamaha 115HP and whenever I am in wavy water, the motor acts sputters and loses power.<br />Does anybody know how high the motor should be mounted or how far above the...
  14. 2

    service manual

    I am looking to buy a service manual for my 1990? 115HP ELTD Yamaha outboard. I want one that will be detailed enough to help me do my own maintenance. <br /> Any Suggestions?<br /><br />Does anyone have a website to confirm the age of the motor based on the serial number?
  15. 2

    waterproofing storage compartments

    I turned my bowrider into a full fledged fishing boat. The bow area now consists of two long storage compartments, a live well where your feet used to go, a small cooler compartment, and an anchor/chain locker. Problem I have is with the two long storage compartments. I want to store my life...
See more
Top