but once i back it in the lake, it takes a few trys to start. even then it dosnt want to. 87 merc 3.0 with aplha one. i do the same proceedure in or out of the water. a few pumps of the throttle, then push the key in for choke and turn it over. why would being in the water make it that much more...
my dad has this old boat in his back yard that has been sitting. i evisioned a resto but want to find out what it is first. i will get pics later but the description is that its red, 90% sure its fiberglass, about 16ft in length, takes an outboard,though its not there. and most obvious was the...
so i bought a float switch for my pump but confused about installation. is this correct: find hot(red) wire from pump and follow it to battery. then find hot wire from battery to the switch at the helm. cut that wire and put wires for the float switch in line. now it goes(in theory) pump, batt...
alpha 1 gen 1. 1987 glasstream. the halfs are back together, per manual, but now the shifter shaft on the upper wont budge. its facing foward as manual says and is lined up whith the shift gear. also the prop shaft and the drive shaft both spin but if i spin one the other doesnt move, is that...
im almost done doing the impeller and gaskets and all but when i slide the impeller over the shaft and key then place upper housing over it and turn clockwise, i get to a point wherer the impeller is scraping the gasket. im afraid im going to rip the gasket. it goes: base -> gasket->metal face...
87 glasstream 18' 130 hp, alpha 1. the owners manual says to put drive into foward gear to remove the drive itself....? if i put the thing in drive wont i flood out my carb? please help guys. i have one throttle that controls the gas and gears, im lost.
guys moneys tight w/ the new baby and house and i need to get my boat winterized but cant go to marina, so i'll do it like i do everything else...myself. its a 18' 87 glasstream w/ a 130 hp merc and alpha one. i dont have a manual or anything...thats what you guys are for:). ive spent probably 3...
the only way to get my fishfinder hooked up is to cut my tranducer cable to get thru the transom. can i do this or is there fiber-optics or something? thank you.
after leaving the lake i got home and did a quick inspection of the outdrive and found bare wires and a few broken strands of wire as well. these wires run paralell w/ the water hose that is tuck up in the drive. i assume these wires control trim, am i right? how shall i replace these? 87 18'...
in order to use my money in other areas of my boat, i decided to make my own bimini top. i got very, very sunburned last weekend so this is a must, but i dont have the $200+ to shell out for a new one, so... i had an old bimini frame which i used the main "bar"/"frame" and bought some 1/2" emt...
first time boat owner and im 27! i do love my first boat, its a 87 glasstream 182 caravelle. good shape in and out good motor, thats all i need and the money was right. btw i did forget the plug the first time sooo.... any way it has the 3.0 merc w/ an alpha one. my question is what would you...
