I mainly fix IO boats but have gotten into a 50hp yr 2000 johnny for a buddy. I did a search here and got some good hints to check before throwing parts at it. I pulled the starter and checked the pluse line it has been rubbed but not thru I vaccumed tested the hose and it checked good,it has a...
Hey I have read some of your post about volvo prop shaft seals. I have talked to a few dealers here in mi they say there not seeing it. I have 2 in my storage building leaking from the bearing carrier area. 1 is a DP did they have issues with them also? thanks for your 2 cents, bob....
Hi guys/gals a family member just got a deal on a mercury 80 hp! serial #2664695 I'm thinking around 1969. and guess what no reverse, are gear case parts good or NLA? he will need a dog,rev gear and seal kit. It sure is tough with faimly they will never ask before buying but always ask to help...
My steering motor froze up over the winter. I first removed 3 screws 2 had insulators on them going into the circuit board, 1 thru the bottom into the frame with no insulator. checking things out and decided to go into the steering motor found the problem. So i figure why not test it before I...
I worked on this thing for a friend thought i had it WRONG. when at idle it stalls i thought it was going rich. then on a test drive just before stalling i hit the choke and it picked back up. i did a search here on what the float level should be everyone says the book! I do not have one and i...
Have a gps that turns off when motor rms go up it beeps and shuts off due to high voltage. it is a merc 50 i have replaced the rectifer still does it. i have no experience here and i'm preaty sure this must be common with todays elec goodies.
Have a gps that turns off when motor rms go up it beeps and shuts off due to high voltage. it is a merc 50 i have replaced the rectifer still does it. i have no experience here and i'm preaty sure this must be common with todays elec goodies.
ser# 196055 any idea on a year? the boat is a 87. looking for max rpm and float level, i have just got the inj fixed and when the motor is trimed at idle she starts to get rich i'm thinking float adj. thanks a.d.
Well i have a 50 classic ser A196055 1986? and it is a classic this belongs to a friend? i guess if he was a good friend he would have a omc ok ok. here we go first it had carb problems rebuilt carbs found bad pump diaphrams. he ran boat 6 times ran great. then i get the dreaded call runs like...
working on a 1963johny 9.5 gear case the shift shaft has a bushing with a o-ring under it. does anyone know the tool number of the driver that removes it?
well i hang on the i/o pages that is my game. i fix a few O/B and own about 5 I have a 57 10 hp and need a pwr head base gasket. who has got them old parts that are now nla at omc/bombardia? thanks bob