Recent content by Airmandavis

  1. A

    Eagle Fishmark 480, Or Lowrance x96 ?

    Eagle Fishmark 480, Or Lowrance x96 ? Having trouble deciding between these two fishfinders. Does anyone have any personal experiance with either one? any insite would be greatly appreciated. Thanks, Zach Davis
  2. A

    50hp force Running rough

    I was on the river today and all of the sudden my motor started running very rough and would not go past 2000 rpms. The fuels lines, and carburetor were ok. Both clinders read 125 on the compression check. Both ofthe pluggs are firing. I also ran the engine for a few seconds with the...
  3. A

    carburetor at Wide open throttle

    Could someone please tell me how far the butterfly valve on the carb should open up? Should it open all the way? Mine is only about 1/4 inch at wot. Thanks
  4. A

    My rebuild

    Im in the process of rebuilding my 50hp Force. I got it all torn down today and ready to go to the machine shop, but im scared of the bearings. Could someone please give me some guidlines on what to look for when inspecting the bearings? My rod bearings on the big end seemed pretty loose, they...
  5. A

    Bore Size

    Is there a way to tell what Bore size you have without removing the head? It is a 50 hp Force. I know It can be 3.312, or 3.375. Thanks Zach
  6. A

    Which Year and Model do I have?

    I have a 50 hp Force. I have Located the tag on the motor that tells The model and the serial number, but where can I find the year of the motor? Thanks Zach
  7. A

    50hp Force overheated

    Was riding at wot last night and the engine started to lose power until it eventually shut off. I could not get it to crank back up. I removed the cover and the head was scorching hot. I later discovered that whoever owned the boat before me clipped the wire to the buzzer so there was no way to...
See more
Top