Current visitors

Home
Members

alldodge's latest activity

alldodge replied to the thread 7.4 merc won't start after winter storage.

Your choke is closed, your good there The antisiphon valve is at the end of the rubber fuel line coming from the gas filter. It's a...

May 31, 2025
alldodge replied to the thread Unusual Bilge pump power issue.

Meter settings Always choose a setting that is higher then what you expect to find, in this case measuring 12V so we go to 20. Its ok to...
May 31, 2025
alldodge replied to the thread Unusual Bilge pump power issue.

Turn knob to the left to 20, this is 20 volt DC setting

May 31, 2025
alldodge replied to the thread Shift cable replacement Alpha I Gen II 5.0L - cable binding.

Un-route the cable jacket so it as straight as possible. Now run the cable thru jacket and then re-route the cable

May 31, 2025
alldodge replied to the thread 7.4 merc won't start after winter storage.

Either the fuel pump is not working or there is a restriction A restriction might be the antisiphon valve that the rubber fuel line...
May 31, 2025
alldodge replied to the thread 7.4 merc won't start after winter storage.

Good grief Cyclops222, there is no gas coming out of the carb, give it a rest Don't know if the liquid is a problem or not right now...

May 31, 2025
alldodge replied to the thread 7.4 merc won't start after winter storage.

How much cranking have you done? It takes a bit of cranking to get the fuel pumped up to the carb after a winter nap.

May 31, 2025
alldodge replied to the thread 99 Monterey 276 Transom Replacement.

Nice work

May 31, 2025
alldodge replied to the thread 2007 4.3L Mercruiser Engine MPI Alarm.

It's not the circulating water pump, that pump has next to nothing to do with pressure or circulation. The sensor is before everything...

May 31, 2025
alldodge replied to the thread Oil Gauge pinned with alarm.

Use item numbers it pic above to clarify which ones you are discussing Item 11 are different variations Item 13 is oil gauge sensor...
May 30, 2025
alldodge replied to the thread Oil Gauge pinned with alarm.

The switch you bought would work if attached to alarm circuit

May 30, 2025
alldodge replied to the thread Oil Gauge pinned with alarm.

The 805605A1 is a switch and opens when oil pressure comes up. If connected to a gauge it would peg it and once oil pressure builds it...

May 30, 2025
alldodge replied to the thread Oil Gauge pinned with alarm.

Lets clarify some things Your motor should have a Light Blue color wire on the oil gauge sender. The oil gauge sender looks like pic...
May 30, 2025
alldodge replied to the thread Unusual Bilge pump power issue.

Yes, post pic of meter

May 30, 2025
alldodge replied to the thread 350 Mag Bravo 3 with poor power steering assist.

The inner cable when applying pressure "should" move the valve rod ever so slightly. If turned quickly it will move the rod a bit more...
May 30, 2025

Show older items

Home
Members

Top