Current visitors

Home
Members

alldodge's latest activity

alldodge reacted to Bondo's post in the thread Hot water takeoff and return with Like.

Ayuh,.... The feed side should be coming from the motor side of the t-stat, either from the block drain as AD mentions, or on my...

Oct 22, 2025
alldodge reacted to tpenfield's post in the thread I/O (Sterndrive) Conversion to Outboards with Like.

Engine #2 is done and safely on the ground. . . . . . Big milestone for this project . . . .Looks like I'll be cleaning up the...

Oct 21, 2025
alldodge replied to the thread Whole series of weird, seemingly unrelated events on Mercruiser 5.0L/Bravo 3.

What's your serial number? Boots were replaced 6 months ago, wonder if a clamp was not installed correctly.

Oct 21, 2025
alldodge replied to the thread Mercruiser 350 MAG MPI.

Use any but you want one with copper contacts, stay clear of aluminum Search HVS

Oct 21, 2025
alldodge replied to the thread gotten one of these?.

Hope ya'll get a refund In KY the State does refund road tax but it goes to the "Marina's" only

Oct 20, 2025
alldodge replied to the thread 2012 3.0L TKS runs great with muffs, but slow on lake....

The manual has a misprint, the LTS plugs should be gaped at .045, use what is on the flame arrestor

Oct 20, 2025
alldodge replied to the thread Hot water takeoff and return.

The supply usually comes from a plug on the circulating water pump, so just plug it. In few cases it can come from the side of the block...
Oct 20, 2025
alldodge replied to the thread I/O (Sterndrive) Conversion to Outboards.

A bit late, but did you think about removing the oil cooler to gain access to bolts?

Oct 19, 2025
alldodge replied to the thread Rebuilt my mercarb, now runs awfully.

The carb is flooding The bit of white smoke on start up is unburnt gas The most likely issue is the float level and could be the float...
Oct 19, 2025
alldodge reacted to Mariah212's post in the thread 93 Mariah engine mount with Like.

I get what you are saying for sure...Because I use a boat about 20-25 times a year and it sits under a cover for 5 months a year...I...

Oct 19, 2025
alldodge reacted to jbcurt00's post in the thread 93 Mariah engine mount with Like.

Polyester before epoxy but never epoxy before poly

Oct 18, 2025
alldodge reacted to MikeSchinlaub's post in the thread 93 Mariah engine mount with Like.

That must be why I'm always complaining about Lowes plywood.

Oct 18, 2025
alldodge replied to the thread I/O (Sterndrive) Conversion to Outboards.

NIce write up Those 6.2s should bring some coin in for the repower

Oct 18, 2025
alldodge replied to the thread 93 Mariah engine mount.

Don't use marine, a regular BCX is good enough. The X means it's good for exterior so the glue will hold up. WOuld not use CDX because...

Oct 18, 2025
alldodge reacted to sdowney717's post in the thread Mercruiser 260 350v8 choke spring? Different clocked positions with Like.

I repaired the shape of the spring, and it works. With heat it moves up. when cools moves back into this position, and that position...

Oct 18, 2025

Show older items

Home
Members

Top