Current visitors

Home
Members

alldodge's latest activity

alldodge replied to the thread Double lip/extended lip seal - which way does it install??.

Always install a single or double lip seal with the lip side toward the liquid you want to keep IN. In this case the lip faces toward...

Jul 10, 2026
alldodge replied to the thread 1997 5.7L thunderbolt ignition. Slow crank.

Plugs look fine, maybe a tad rich but nothing to worry about

Jul 10, 2026
alldodge replied to the thread Corsa Black plug 3 wire diverter to white plug 3 wire?.

Correction I went from 4 wire to 3 wire when my started having trouble. The 3 wire is the new style like in your first pic. Bought a new...
Jul 10, 2026
alldodge replied to the thread 1997 5.7L thunderbolt ignition. Slow crank.

Sorry about my previous questions, you mention about pulling plugs Could be your meter is off a tad (fully charge should be 12.7V), and...

Jul 10, 2026
alldodge reacted to DeepCMark58A's post in the thread Fish habitat with Like.

We cleaned up the shore today clearing weeds after we had it treated. we have a side dock in about 24" of water, after we removed the...

Jul 10, 2026
alldodge replied to the thread 1997 5.7L thunderbolt ignition. Slow crank.

Change cables and two starters doing the same thing would tell me it's not an electrical problem. Have you checked the level of your...

Jul 10, 2026
alldodge replied to the thread Corsa Black plug 3 wire diverter to white plug 3 wire?.

I took a set off my motor during repower and put them on the shelf. Did replace the 3 to 4 wire some years back. I'll go check later and...

Jul 10, 2026
alldodge replied to the thread U-Joint Help. Which one?.

Welcome @Terryspine We will all enjoy your knowledge but please read the forum rules. Any thread over 90 days old without a post shall...

Jul 9, 2026
alldodge replied to the thread Do it yourself Pumpout?.

I guess you just like to bring up irrelevant info

Jul 9, 2026
alldodge replied to the thread Hydraulic trim tabs.

Have not seen this type, doesn't look to be Bennett tabs. I would have to take it apart to find out how to fix

Jul 9, 2026
alldodge replied to the thread Do it yourself Pumpout?.

A question was asked and I answered it If you go for a porta potty then you have the "same" issue just in a different container, so...

Jul 8, 2026
alldodge replied to the thread Do it yourself Pumpout?.

A large shopvac will suck it out

Jul 8, 2026
alldodge replied to the thread Engine thump noise then full stop.

Welcome Just to clarify, you put the drive in forward or reverse and you can turn the prop by hand, right?

Jul 8, 2026
alldodge replied to the thread 4.3 MerCruiser TKS optimal running temps..

If your temp goes above 180* or you smell rubber burning

Jul 8, 2026
alldodge replied to the thread 4.3 MerCruiser TKS optimal running temps..

Welcome Running motor at idle doesn't fill the exhaust manifolds completely. This means one side will always be hotter than the other...

Jul 7, 2026

Show older items

Home
Members

Top