alldodge's latest activity

What are the specs of the trailer, GVWR weight capacity, length What is the weight of the 25 footer and model

What Mike said. Might be able to remove some of the wall behind it. Just for some maneuvering room.

This is what I'm thinking. Make a backer like the yellow square, push it through the large hole and maneuver it into place. Use some...

hit the autobody supply store near you. get a pint or quart of tiger hair filler. then fill the voids and give the screw something to...

Boat? What boat? I've never seen one, I don't even know what a boat is...

Problem with just a backer plate is I'll need to cut about 1/4 inch further up and there isn't much there now

Thanks both of you have good ideas, similar to my initial thoughts. Mike does some nice work so thinking maybe he has another idea out...

And I'll go back to my original thought, that your within 200 rpm of max now what makes you think that if you get the extra 200 rpm at...

Can you get access behind it? Do you have some resin on hand and glass? I'd fabricate a backer plate and see if I could fish it in...

(making number up) So if you have 9 people on the toon and it's getting 2.5 MPG at 5500 rpm that is not relevant because you want to...

Suggestions on how to repair the latch hole? Yes this is my Craparral where looks like they used a drill bit to cut the hole instead of...

.....and the peak of the torque curve is usually much lower than the max RPM point.....at least that's the way it is on 4 stroke diesels...

Reading intently, but sure like to hear from who told you this. Marine motors are by far more sensitive than Auto?

There is always a give take between max RPM achievable and max RPM performance increase. Gaining that last 200 RPM may not gain any...

I fix :)