I replaced the blower after checking to a battery its dead put new one on nothing checked it to the battery its good but wondering if there is an inline fuse and where do i get a wiring schematic.to trace wires i checked what i believe to be the blower fuse in the fuse box it was good put a...
I have an overheating problem. I have replaced the impeller bearing and seals thermostat sensor and most hoses. when I put the muffs on no water to the pump .so I've disconnected it at the power steering cooler and ran it from the blue hose connector and water makes it thru the power steering...
I have the same issue. There's water exiting the drive. when hooked to a hose bib. If I start it still no water out the exhaust prop port area. after first time out after winterized it over heated. I've checked the hoses 3 times there right I think once they were crossed at the pump changed...
ok i reconnected the pump hoses.And i connected the water hose to the connector off the t pipe and water came out the drive where the muffs hook up to. but no water came out the prop area where water is saposta exit
Iam having a very similar problem not getting water to the pump with the muffs on also no water out the exhaust either just exhaust went to the lake over heated just like the last guy changed impeller bearing seal thermostat sensor and hoses but if water is not even getting to the pump with the...
