Any help would be greatly appriciated. I have my boat at the dealer right now, they have replaced 3 fuel injectors that were no operating right so far. But they are still stuck on the original problem. When this first happend, I was running at 4500rpm for about 15mins, I throtled a little more...
My 1994 150hp evinrude smokes really bad at start up. The problem seems to be fine at cruising speed and not near as bad after it warms up. But at start up, it's embarrassing to say the least, plus the plugs foul out allot sooner than normal. The outboard is carberated, and I suspect the problem...
My son has a 1988 48hp evinrude, the bottom cylinder doesn't fire, I sujested that he switch ingnition coils to see if one is bad, but he had the same results, no fire on the bottom. Is there any way to test the power pack? or could there maybe be a problem with the stator? Thanks for any/all...
OK here's my problem. I have an 1984 60hp johnson. Last week I started the motor and it started just fine. While I was letting it warm up it lost the lower cylinder. I changed plugs thinking it was a fouled plug, no luck. I pulled the boat out and stuppid me with out even checking for spark I...
Here's my problem, I have a 1988 V150 Merc. I just recently bought the boat and it hasn't been run for 2 years. I have replaced all of the cooling parts so far and now the alarm beeps even when I disconect the 3 points that it monitors. I have about 4,000 ohms of rsistance between the power wire...
Can't get my motor to pee! I've replaced the pump and had the lower unit off 3 times since, I've replaced many water pumps on other outboards I've owned before, but this one's got me baffled. My question is, how does the copper pipe between the block and the pump connect at the block end? Is...
