Hi ... I have a 1969 Evinrude 19ft boat with a 4 cylinder Chevy motor Model CUFM-69B.... While replacing the exhaust manifold gasket I noticed the pipe coming off the manifold to the hose connecting it to the intermediate housing was cracked on the inner sleeve... The sleeve that separates the...
Hi, I have a 1969 Evinrude with an OMC I/O 120HP Model #CUFR69B. I need ball gear kit for it but can't seem to find one anyhere online... I was told these were press on type ball gears. Does anyone know if this is correct and if so where I might find a kit? Iboats doesn't list one....Thanks
Hi, While I have the drive off the boat should I replace these two gears or are they good for awhile longer.....
Also can someone help me identify these plugs... I believe 1-is the dipstick 2-is the drain but I don't know what 3-6 are.... Thanks all....
So a little history....Ok so I got my boat out of storage (after 9 years) a few weeks ago and started to do some work on it. Its has an OMC 120HP I-4 in it. I had to redo all the wiring in the engine compartment which went fine. I pumped and flushed out the fuel tank. Rebuilt the carbs and...
Well I have a 1969 19' Evinrude Sport Fisherman 120 with the original Evinrude trailer. I have only taken this boat out maybe 10 times in the last 14 years and every time I do I can't seem to find an easy way to load it on the trailer. Now the question. Is it normal to winch the boat up on the...
Hi all, Well I have a 1975 or so 75HP Chrysler outboard that won't start. I winterized it last year and now it just won't start. Cranks fine. I have new gas and a freshly charged battery. I have fuel to the carbs. I pulled the plugs and they all looked fine however they were wet. So it seems as...
Hi. I have a 75hp Chrysler, model 757HB. The motor seems to run good however it overheats. It has a new impeller however it is a 6 blade instead of a 12 blade like it should. I don't know if this matters however if someone knows that would be helpful. I have checked the water pump, removed...
