Greetings
I damaged one of my carb bodies during a rebuild
It was the upper carb on a 85193H
I purchased a set of carbs of the interweb that supposedly interchanged from a Johnson 1972 85HP
There are some significant differences
Original body SOP# 314948
Replacement SOP# 317472-D2
-Idle...
I am needing a replacement hub for the above trailer
The hub is extremely low profile as it is only 2-3/4" long
Inner bearing is 1-1/16" (L44549 or L44649) and the outer is 3/4" (LM11949)
I have dug pretty deep on the interweb and am unable to track down a suitable hub.
It appears to be a AG...
Greetings
Have owned the above boat for a few years. The prop is a bit buggered up.
Pulled the old one off and it is 14.25" x 21 pitch. Does not appear to be anywhere close to the original Evinrude prop.
On a smooth lake with light gear and my 250# mass I have reached 35 mph on gps.
Could...
I am trying to add remote controls to my 1976 Johnson 9.9 10EL76H
I have purchased OMC 0398032 adapter kit but am confused as to what the box is supposed to look like.
Is it a single or dual lever?
Are the cables easily obtained?
Thank you!
Red
I have a new to me 76 9.9
Been running it in a 15 Gallon bucket just to see how she runs.
Starts right up but shoots a wad of milky substance upon start up.
After a number of minutes the water in the bucket is quite nasty.
After a few hours the water looks more brown than anything with...
Does anyone know of a fuel tank that will fit nicely in the belly of my 18' Super sport?
I will be using the boat this summer so prefer to track a tank down prior to ripping up the floor.
Any help would be appreciated.
Thank you!
RED
