Recent content by bitesomthing

  1. B

    Rayamarine A128 to Standard Horizon GS6000 NMEA connection

    Just an update. I took the boat down to the water on Saturday and Sunday for some fishing. Once the GX6000 received signals from other boats it all started working as it is supposed to.. The A128 is now shoing AIS is connected..
  2. B

    Rayamarine A128 to Standard Horizon GS6000 NMEA connection

    No, the VHF must rely on a external GPS antenna or to be networked with and a second gps unit in order to have gps capabilities. everything is networked properly. I guess ill be calling Raymarine for this one.
  3. B

    Rayamarine A128 to Standard Horizon GS6000 NMEA connection

    yes i have a second antenna to the radio, i just installed the radio this week so, I have not had boat on the water yet to be able see other vessels( this weekend). Just weird how the Raymarine A128 shows in the diagnostics that its connected but, where it tells you what is running on the A128...
  4. B

    Rayamarine A128 to Standard Horizon GS6000 NMEA connection

    NO, they both use Nmea2000 ( seatalk-ng) or NMEA1830.
  5. B

    Rayamarine A128 to Standard Horizon GS6000 NMEA connection

    this is from the manual, i have seen this statement a few locations in the manual: "Note: Up to 15 AIS targets can be shown on the display. All received AIS targets are displayed on the compatible chartplotter or navigation software via NMEA 0183 or NMEA 2000."
  6. B

    Rayamarine A128 to Standard Horizon GS6000 NMEA connection

    i just connected my Raymarine A128 MFD is connected to my Standard Horizon Gx6000 VHF w/ ais. The Standard Horizon will show the GPS coordinates that are sent over from the A128. The Raymarine shows "AIS IS NOT ON OR NOT CONNECTED", yet when i go to the Diagnostics of the Raymarine A128 it...
  7. B

    2006 yamaha 115 four stroke stiff shifting...

    Hello all and thanks in advance. i have a 2006 yamaha 115 hp four stroke with 200 hours on it. Motor runs flawlessly until now. Boat had 200 hour service done,i then took boat out for about a 2 hour run time trip and then parked boat for 2 weeks. Getting ready for my last trip i bumped the...
  8. B

    1994 17 ft proline center consloe question

    Re: 1994 17 ft proline center consloe question Here is what i was sent from proline. Incase anyone else is looking for this information 1994 17ft proline center console
  9. B

    1994 17 ft proline center consloe question

    Helllo, was wondering if anyone out there has the same boat that could help me out with a question? Here is the question, i am trying to find out what the Limit plaque on the boat says for limits, mine is so faded i cant read it. Example of Plaque: Maximum number of...
  10. B

    bait pump issues

    Ok heres my issue. 1994 proline 17ft center console. Bait tank is in front of console. Just got boat 2weeks ago I replaced the old pump which was a 800 gallons per hour (800 didnt have much volume either is why i changed it)pump with a new 1100 gallon piranha shurflo pump but when I turn on the...
  11. B

    1994 17' Proline center console

    I have been trying to find out some information on a 1994 17ft Proline with a 2007 yamaha 115 4 stroke on back. i figured some out here would know. Questions are these: 1. Does anyone know what size fuel tank these boats had installed in them???? 2. i know there are a lot of variables (...
  12. B

    looking at boats

    been looking to buy new boat and want something i can run in local lakes and something i could run to catalina in. Been looking at the tracker multi species boats either 17.5' or 19'wt and i am kinda interested in them. I was wondering if anyone out there has run one to catalina or out in the...
  13. B

    1983 115hp Lower unit oil leak

    Hello guys, i took off my lower unit to see if i can find where its leaking from, well here's what i found. The seal in the shift shaft bushing is where it seemed to be leaking from, The part of the rubber seal that wraps around the shift shaft has a Coil Spring that looks like it keeps...
  14. B

    1983 mercury 115, in over my head again, lower unit instalation

    Hey guys, 1983 mercury 115hp: needed to take off lower unit to see where leak was coming from. Found bad seal around shift shaft. all was going fine until i had to put unit back on motor. While putting unit back on motor i somehow put a little pressure on the prop and when i did that, the...
  15. B

    help me identify this part 1983 merc 115hp

    Hello, i have a 1983 mercury 115hp (Tower of Power) and had my carbs rebuilt. well the rebuilder did a ****ty job and i have been going through it myself. i was wondering if any of you guys could help identify this part and what specificly it does? i think its a fuel enricher but not sure...
Top