87 115hp yamaha on a 16 ft searay
ss prop 13 x21 my wot was 4800
just bought aluminum 13 x 19
what do you think my wot will be ?and will I slow down or
maybe a little faster
motor should run between 4500 and 5500
for wot does that mean I should be at 5500 ?
Can some one tell me some spec from a yamaha manual
I have a 115 yamaha 1987 ETLH I have some photo copys of the time specs and stuff from the yamaha maual. Problem is it refers to like 3 different models a b and cv well I have no idea what my motor is except for 115etlh. According...
115 yamaha 87 oil injection was unhooked when I bought it. Well I plugged it back in and it works fine. I noticed that the 4 nipples on the pump produce oil at a different time 1 then 2 then 3and4 at the same time. I guess what im asking is do I have to hook this up so that certain...
Id like to mount another fuel filter inline with the existing one. I have a 115 yamaha 87 and like just about every one else on here I have dirt in the carbs giving me a bog.
Ques is there should be enough suction from the fuel pump to give me enough flow right ?
my 1987 yamaha 115 starts fine
but idle is some times right on at 700 other times its 200
any ways I give it about quarter and it seems like it is only runing on 2 or 3 cylinders ill touch the choke and it picks up and is fine. I ve replaced the plugs it made a small difference. I have...
wheres the sensor for the speedo ?
though the boat was goin slower but im suspecting
that the speedo is off. today it stuck at 15 mph
any one else have a similar problem with there motor?
motor has electric shift works fine at low speed but once you put the power on it jumps in neutral. I ve had the leg of gears look fine and ive replaced the oil.
Im assuming I have a bad solonoide ?
any one know where I can get one ?
My boats has a terrible finish from oxidation.
Id like to refinish it but dont no alot about gel coat.
Can I spray it on or roll it and what type of finish will it give me ? Id like to have a good shine will I have to buff it afterwards ?
Does any one out there have the timing specs for
my motor. I just bought the boat form my buddy
and I suspect he's adjusting the timing wrong.
last year WOT was 5400 now with the two of us in it
same blade WOT is 4800 and I cant get the speed out of it that he was running last year.