Bondo's latest activity

  • Bondo
    Bondo replied to the thread Sand Ingestion - DP-SM.
    Ayuh,..... There's little to no chance of that, with a good functioning system,..... If yer that worried 'bout it, after doing so...
  • Bondo
    Bondo reacted to nola mike's post in the thread My block is drained, right? with Like Like.
    As a (very) late update... Apparently my block is fine. So... strange. Definitely cold enough that it should have cracked if there was...
  • Bondo
    Bondo reacted to Pmt133's post in the thread 2-4-C with Like Like.
    My machine shop is still 2k for a complete short block and rebuild to whatever specs you want. 2400 for a long block. I can blow up a...
  • Bondo
    Bondo replied to the thread 2-4-C.
    Ayuh,...... 'n Expensive,..... A 350 long block is $5,000,00 on a pallet, out the door,.... Used is less,.... An Alpha drive is...
  • Bondo
    Bondo reacted to Scott Danforth's post in the thread 2-4-C with Like Like.
    Many dealers are struggling right now until you get into the range of boats that are resistant to financial climate changes. even great...
  • Bondo
    Bondo replied to the thread Sand Ingestion - DP-SM.
    Ayuh,...... When you change the impeller, flush from there, backwards out to the drive,.... When you drain the block, pull the plugs...
  • Bondo
    Bondo reacted to muc's post in the thread 2-4-C with Like Like.
    Them's fighting words Sir. I joke with the younger techs that this is a hill I'm happy to die on! I have both on my bench. I had always...
  • Bondo
    Bondo reacted to alldodge's post in the thread cupped prop question with Like Like.
    There is always a give take between max RPM achievable and max RPM performance increase. Gaining that last 200 RPM may not gain any...
  • Bondo
    Bondo reacted to Chris1956's post in the thread cupped prop question with Like Like.
    Gee, most props are cupped. Is your 14P prop cupped? if so, changing the pitch to 13P cupped prop should give you the 200RPM you want...
  • Bondo
    Bondo replied to the thread Used Glastron GX 205 with engine issues.
    Ayuh,.... I posted in yer thread over at marine engine com,.....
  • Bondo
    Bondo replied to the thread cool fuel III interesting trouble.
    Ayuh,..... As always, Great info BD,.....
  • Bondo
    Bondo reacted to Bt Doctur's post in the thread cool fuel III interesting trouble with Like Like.
    Got my hands on a unit that a shop had replaced because of a fuel problem. The unit was not cooling the fuel leading to some issues...
  • Bondo
    Bondo reacted to Bt Doctur's post in the thread 2001 Mag MPI Alpha lugs with Like Like.
    are you absolutely sure you have a 350ci inch 5.7 motor? Almost sure the boat performed well before the cracked block and now it...
  • Bondo
    Bondo reacted to Stinnett21's post in the thread Best way to mount bunk boards with Like Like.
    I'm the original owner of a 2002 21' that I trailer and has many hours on it. I replaced my bunks once. They are attached with lag...
  • Bondo
    Bondo reacted to Pmt133's post in the thread What is the Best Way to Repair the Snaps on a Sunbrella Cover with Like Like.
    I'd pull all the current snaps, stitch on a double of the fabric front and back and then install the new snaps in proper locations...
Show older items
Top