Recent content by brivander

  1. brivander

    Need Main Jet Thread size for Mercury 2.2 (2.5, 3.0, 3.3) 2-Stroke

    I pulled restrictor out of my 2.2hp to turn it into a 3.3hp -- anyone know the thread size of the main jet in the carbs? My 2.2 came with a #96, the newer 3.3's are #86 (same carb), I'd like to try a #90 or #92 but cant find anywhere the thread info on the main jet....
  2. brivander

    2006 Crownline 220 EX stock prop?

    Can anyone here tell me what the stock prop is on a 220 EX 5.0/260hp alpha? Pitch and diameter would be helpful.
  3. brivander

    Detroit river

    Re: Detroit River boaters - Post a pic of your boat! Re: Detroit River boaters - Post a pic of your boat! I'll follow that. If I'm out, I'm flying a pirate kite.
  4. brivander

    Detroit river

    Re: Detroit river Here is a picture -- head north up the livingston channel to where it opens up and hang a 180 degree left. Stay North of the red line I drew unless you are in a pretty small boat or really know where the hazards are. A pretty BIG boat can get through there (south of that...
  5. brivander

    Boat Won't Start, Help!

    So I got my boat back from service, after, well forever, go to start it in my driveway and what the hell, nothing. Cranks fine, the only sign of life (if you can call it so) is a backfire through the carburator...(note: do not have your face above the carb when you look to see if it is getting...
  6. brivander

    Drainage Question

    In my 92' four winns 221 lib -- when I get water in the cuddy, it doesn't drain back to the rear bilge so I can drain it out of the boat even if it's higher than the drain hole, what do you think, a clog? What's going on? The center of the floor does pull out if the rear seat is out of...
  7. brivander

    NEED 211 liberator graphics

    Re: NEED 211 liberator graphics Yep that is what I got, with a note saying to soak them in water or use a heat gun to apply, they actually sent me three of them, I was thinking that may not be a horrible color, but yes, it is. Is that just because they are old??
  8. brivander

    NEED 211 liberator graphics

    Re: NEED 211 liberator graphics Picked these up on ebay -- not the colors I like, but we would use as a template, they were asking $49.99 and I offered $25 and they took it, that should be way easier, then we can just make the 221 graphics separately .
  9. brivander

    Four Winns 221 Liberator Interior Storage????

    Just purchased a 1992 221 Liberator -- where the hell do you put anything on this boat, the rear seat cushion doesn't come up for storage (every other Liberator I've owned has) -- and it doesn't have bow anchor storage. Has anyone modified the back seat cushion to allow for removal, or made...
  10. brivander

    Detroit River/Lake Erie Area

    Ok so I see the same people on the water all the time, but was curios who else is out there, post your boat etc and we'll see you out there this year. We are out by the rock wall/Sugar island often or by Dunbar and Sullivan hanging out. 1992 Four Winns Liberator 221 White/Teal, if it's...
  11. brivander

    NEED 211 liberator graphics

    Re: NEED 211 liberator graphics Oh and from the "L" to the "R' is about 39 inches.
  12. brivander

    NEED 211 liberator graphics

    Re: NEED 211 liberator graphics Here are some pictures -- the one picture shows the overall length taking the whole picture would do you know good if you can't read the tape measure.
  13. brivander

    NEED 211 liberator graphics

    Re: NEED 211 liberator graphics Ok cool -- I'll post better images tomorrow. I'd like to get some just like these Black/Gray -- whoever put these on actually used two sets and offest them a bit (gray over black), but the gray is cracking and fading badly. But really anything classy would be...
See more
Top