BWR1953's latest activity

  • BWR1953
    BWR1953 replied to the thread 1992 150hp XR6 gauge setup.
    In addition to the tilt and temp senders I ordered yesterday, today I ordered a siren for the overheat sender, plus a controller for the...
  • BWR1953
    BWR1953 replied to the thread 1992 150hp XR6 gauge setup.
    Correct. Check Post #15 above. The unlit light is for the overheat sensor and the plan is to have it come on and be flashing if...
  • BWR1953
    BWR1953 replied to the thread Enough is enough.
    I agree that taking the legal steps is a very good idea. But also take physical precautionary steps. A piece of paper in a...
  • BWR1953
    BWR1953 replied to the thread 1996 mariner 30 hot start issues -- at my wit's end.
    I had a similar problem with my 1985 50HP. It turned out to be a bad CDI box. I'd started troubleshooting and was taking electrical...
  • BWR1953
    BWR1953 replied to the thread 1992 150hp XR6 gauge setup.
    The engine and entire wiring harness was moved from a 1992 donor boat to my current 1997 boat en toto. No other buzzer was found. I do...
  • BWR1953
    BWR1953 replied to the thread I was just four months old.
    If you don't have Facebook, get it so that you can watch this video! (y):D:cool: https://www.facebook.com/share/v/1M7DCWPZDz/
  • BWR1953
    BWR1953 replied to the thread 1992 150hp XR6 gauge setup.
    That's the plan. I already have an LED light in place and have been looking off and on for a flasher for it. I also have a...
    • 9.jpg
  • BWR1953
    BWR1953 replied to the thread 1992 150hp XR6 gauge setup.
    I went out to the garage this morning while it was still cool and shorted the overheat sensor to ground, then turned on the ignition...
    • 2.jpg
  • BWR1953
    BWR1953 replied to the thread 1992 150hp XR6 gauge setup.
    I'll connect the overheat tan/blue wire to a flashing light and horn/buzzer setup. If it fires off, it'll be shouting and blinking at...
  • BWR1953
    BWR1953 replied to the thread 1992 150hp XR6 gauge setup.
    Yup, you're right on. The temp sensor is on the port head, connected via a tan wire. This evening I found the overheat sensor on the...
  • BWR1953
    BWR1953 replied to the thread 1992 150hp XR6 gauge setup.
    Thanks for the great location help! I tilted the engine up and found the sensor right away. Definitely going to need a new one. At...
    • 1.jpg
    • 2.jpg
    • 3.jpg
    • 4.jpg
    • 5.jpg
  • BWR1953
    BWR1953 replied to the thread 1992 150hp XR6 gauge setup.
    Hi guys! Thanks for all the great info. (y) I've been busy, but I actually did get some things done! 😁 I'll post more in a couple...
  • BWR1953
    BWR1953 reacted to redneck joe's post in the thread Nobody fishing? with Like Like.
    National Hug a Fish Day
  • BWR1953
    BWR1953 reacted to Berdink's post in the thread What Thrust Size Trolling Motor? with Like Like.
    Yeah, and for me, fishing faster current rivers for Salmon, using the 9.9 I already own, actually allows me to buy a bow mount trolling...
  • BWR1953
    BWR1953 replied to the thread What Thrust Size Trolling Motor?.
    Interesting, but sounds very, very expensive! 😧 As an old bass fisherman, I just use my bow mounted trolling motor.
Show older items
Top