Recent content by capitan

  1. C

    suzuki df15 4 stroke possible carb problem

    I can only get it running more smoother if i restrict the air intake by about 2/3rds. I have stripped the carb and sprayed carb cleaner in all the holes but am a bit puzzled, does anyone have any suggestions please?
  2. C

    champion or ngk spark plugs

    For a 1995 Johnson 8hp two stroke would you fit champion or ngk plugs into it and which ones would you recommend please?
  3. C

    suzuki 4 stroke slow running problem

    We have a 2005 Suzuki 15hp 4 stroke outboard, runs fine for say 20 minutes and then on slow running will cough and play up and we try and nurse it with a bit of choke but not successful. Then it?ll be fine for another half hour or so! I have stripped the carb and sprayed carb cleaner every...
  4. C

    johnson evinrude ignition power pack cd2

    Hi, does anyone in the UK have a power pack cd2 for sale that will work on my johnson 8hp 1995 please?
  5. C

    johnson overheating

    Hi, i have just got a pair of matching johnson 8hp engines, both 1995 models. They have been stored for a few years as for what ever reason the previous owner must have come across a problem and took them out of service. After replacing obvious parts to get them going again, both of them start...
  6. C

    johnson 4hp slow running problem

    Hi, i have an old twin cylinder johnson 4hp outboard with a points system, one of those that the prop is in gear as soon as you start it (has no neutral gear) It starts with the throttle at least half open but when you try and turn it to slow down below about half throttle it suddenly dies. I...
  7. C

    what cc is my evinrude 6hp?

    Hi, does anyone know what cc an evinrude 6hp please and can changing the prop make it more powerful?
  8. C

    Johnson 9hp problem

    I have just bought a non running Johnson 9hp 1979 and had 50psi in one cylinder and 65psi in the other, i could only eventually get it started and running on full throttle, renewed the head gasket as it was knackered between the bores and then i had 90psi in the top and still 50psi in the bottom...
See more
Top