Recent content by carver

  1. C

    raritan hot water heater thermostat

    I believe my thermostat is shot does anyone know hao to repalce it the manual does not do a good job explaining thanks
  2. C

    rpm variation in port engine

    my 5.7l mercruiser engine varies sometimes up to 300 rpm with no change in speed it does stay in long at one range. this does not happen all the time both engines and still have problem mechanic is miffed. coud it be a prop isssue ist is not cavitation would appreciate some elp thanks
  3. C

    mercruiser port engine rpm increase

    I had two imstances when the rpm started to increase on the port egine first time I had a folllowing sea in the hudson river. Maybe it cavitated. I took out thr nrxt a brought the rpm to 3000 no problem. second time was when i was making a sharp starboard turn. checked the trim and the outdrive...
  4. C

    yellowisg color after waxing

    I used 3M wax and cleaner on the deck of my carver and when I rubbed it off it left a yellow color similiar to the wax never had this problem with the hull
  5. C

    yellowish tint after waxing

    I used 3M wax abd cleaner on the deck and got a yellowish color similar to the wax. Its as if the wax didn't come off wax was from last year any thoughts
  6. C

    carver tambour doors

    I have a 1988 carver santigo. the tambour doors under the galley table need to be replaced. does anybody have any ideas where I can get them/ thanks
  7. C

    anchors

    I have a 30 ft santigo carver weight 11,000 lbs and boat the hudson by present anchor is a danforth. I heard and I have trouble holding any suggestions thanks
  8. C

    y valve won' turn

    any suggestions on how I can free the valve before a begin this drity task of replacement
  9. C

    refrig door Norcal Model 250G

    I have any 88 carver santigo with a norcal frig recently the door will not stay closed and it is difficult to place the latch in. any ideas? they don't make this product anymore wondering if it a common problem and someone would have an answer. thanks
  10. C

    anchor bow rollers

    I have a 88 carver santigo. I installed a windless which proceed to ripoff the poorly designed "u" guide on the bow anybody buy and install a bow roller guide for this type of boat
  11. C

    painting top of boat

    i have a carver santigo 1988 it has a burgundy side but i can't buff it up so i'll paint anybody know the right color for this boat and what paint to use thanks
  12. C

    thermostat removal5.7 liter mercrusier

    mechanic yet to show up to winterize engineer. getting cold in ny. I used to remove thermostat in my 6 cyclinder merc.but it seems the thermostat in the 5.7 liter maybe located differently. I removed botls where hoses come in I thought thermostat would be located right there but whole section of...
  13. C

    thermostat removal5.7 liter mercrusier

    mechanic yet to show up to winterize engineer. getting cold in ny. I used to remove thermostat in my 6 cyclinder merc.but it seems the thermostat in the 5.7 liter maybe located differently. I removed botls where hoses come in I thought thermostat would be located right there but whole section of...
See more
Top