I only had time today to sand and put one coating of bondo on. I sanded it down a little again with 80 but didnt get to the 150 before I had to go coach a basketball game. What should I use for paint?
My plan was to sand again, place one more layer of fiberglass mat. Do some finish sanding and then paint. Im not really sure of the painting / finish process. I don't need it to be perfect but would like to at least cover this spots so they don't stick out too much.
The first one is a hole. I filled it in with liquid resin. I beveled around the hole in top and bottom side and grinded all around it with 40 grit to hopefully create a good bonding surface.
Not sure what effect it would have but I'm pretty sure I have had the wrong belt on it since I bought it (belt that came with it). I posted pictures of the new belt I got and put on and the old one. After putting the new belt on and putting everything back together she appears to be running as...
The pulley above it does have a slight wobble and sounds like bearings are going bad. Any idea where I could get the best deal on both of those parts? Seems to me it may be best to just replace them? Thanks in advance for all the help!
I'm honestly not sure, looking at it you can see that it's not lined up. I used a block and hammer to push it back in, so now everything is lined up. I'm guessing it will just work it's way out again?
I have a 1990 mercruiser 3.0. Was out on the water and weird flapping noise coming from front of motor. Figured out it was from the belt area. Went home and checked closer and noticed that the harmonic balancer isn't lined up with the idler pulley of the alternator. It looks like it has...
