Ok i have a brown, white witch i know is ground green and yellow. The lights that i have have a green and brown hook up. green turn singles and brown for taillihgts. where does the yellow go. I had the green and brown hooked up and nothing when i hooked up the yellow they both blinked no mater...
1974 75hp chrysler. I was going down the lake and the motor started to die. I noticed i have to keep pumping the bulb to keep the carbs full. If not the motor runs on the fuel thats in the carb. It dont seem to be sucking it out of the tank. But at one time when it started to sputter and primer...
Besides using actuall fiberglass boat paint what is the next best (cheapest)paint to buy. Would Extierir semi gloss work. I wanted soemthing to make it look shiny. Thanks for any help.
I posted a few times on here 1974 chrysler 75hp why my starter made a clicking noise. Well just in case anybody else has this problem it was my battery cables that were bad. WASN'T the starter like most people thought. its purrin like a kitten. Thanks for all the help<br /><br />Chris
75hp chrysler 1974 <br />Ok i bought a new batter 550 cold amps 625 cranking amps is this not enough amps or something. I turn the key and it just clicks turn the key again and click Changed solnoid starter turns over by jumper cables to the battery. But turns over slow. Last season i used the...
I have a 75hp chrysler 1974 and theres a purple wire Going from the terminal block on the engine to the key on the terminal block its marked Generator. Where do i hook that up too by the key switch? What exacltly does the purple wire do? Thanks again people<br /><br />Chris
1974 75hp chrysler. Tried turning the key and all i got was a constant clicking noise. i replaced the solonoid last season. The battery charge was at 2/3 My battery to low or bad connection somewhere. Or may starter going bad? Thanks<br /><br />Chris
I plan on wiring up a am fm radio on my boat and some lights. How should i go about this. Should i just run straight to the battery or not? All i got right now is the battery cables to the 75hp chrysler elec start. Or is there a safer or diffenrt way than what im thinking. I know ill have to...
I plan on wiring up a am fm radio on my boat and some lights. How should i go about this. Should i just run straight to the battery or not? All i got right now is the battery cables to the 75hp chrysler elec start. Or is there a safer or diffenrt way than what im thinking. I know ill have to...
Is there a such thing as to much pressure in a one of those. Its for a old evinrude 18hp The motor seems to run smoother once theres alot of pressure in the tank. But when i turn the cap theres sure is alot of hissssssssssssssssssssss just wondering<br /><br />chris
Is there a such thing as to much pressure in a one of those. Its for a old evinrude 18hp The motor seems to run smoother once theres alot of pressure in the tank. But when i turn the cap theres sure is alot of hissssssssssssssssssssss just wondering<br /><br />chris
I have a late 1950's 18hp Evinrude. I was wondering if there was a way i could run just a gas line from a fuel tank to the carb. Right now it has 2 seperate hoses 1 air 1 fuel. Is there an easy fix to that. Could i just run a fuel line for the gas and leave the air cut or something.<br /><br...
