Recent content by chrysler_joe

  1. C

    50 force tilt ram oring

    what is the correct part number for the o-ring that goes on the ram for a power tilt 1993 50hp force Cheers Joe
  2. C

    90 l-drive

    this motor has good compression good spark and carbs were cleaned but still has trouble getting on plane or getting to the high rpm's starts and idles fine any ideas Cheers Joe
  3. C

    l-drive lower unit

    does anyone know if I can use an outboard lower unit to replace my blown l-drive lower
  4. C

    Fuel Gauge

    I'm looking for a square fuel gauge from a 1988 Bayliner Cobra boat made by Faria Does anyone know where to look? Joe from Toronto
  5. C

    L-Drive

    I have a 1990 bayliner with a 4 cyl. l-drive and I need the 3" diameter flexable exhaust hose that goes from the motor through the boat to the lower unit Merc wants $300. and it may not be available Any ideas? Joe from Toronto
  6. C

    Elgin 25hp

    I have an Elgin 25hp that is missing the electric control cable plugin Anyone know where to look? Cheers Joe
  7. C

    Westbend 80hp

    Hi I have an Elgin 80hp that is missing the plug in wiring cable at the front of the motor It's rectangle shaped with eight or ten pins Cheers Joe
  8. C

    Westbend 80hp

    Hi all I have an old Westbend 80hp and I need the wiring harness that plug into the motor. It's rectangle shape with eight or ten pins also looking for any hood badging and a prop Thanks Joe
  9. C

    Force 1997 throttle ?

    Did they change the shifter cable connection at the powerhead for this motor? This must be Mercury. Where can I get parts so I can use a set of controls from a 1995 Force motor?
  10. C

    1997 Force 75 hp

    I have a 1997 Force 75hp needing a piston I put in a piston from a 1990 90hp It fits perfectly but the connecting rod must be a different diameter Also the other 2 piston rods use a plastic cage with the roller bearings attached Is this Mercury? Could I just change the connecting rod? Does...
  11. C

    1988 force 125hp

    Are the keyways available at uap or any other auto parts store or do you have to go to a marina? Do you know the part number?<br />Cheers Joe
  12. C

    piston rings

    Force 120hp with the Merc ignition 1992-1993<br />All 4 top rings were broken and all 4 bottoms were fine Was a running motor.Was there a problem with these rings and how much would they cost What is the part # standard bore<br />Cheers Joe
  13. C

    1989 125hp Force tilt/trim

    This motors tilt/trim pump housing was worked on before I got to it and the backyard mechanic lost one of the springs in the pump housing<br />Can these be purchased?<br />Cheers Joe
  14. C

    What year is this outboard?

    Hi All<br />I have an old outboard made by Viking The model # is 3D13V made in Barrie Ontario Canada<br />I think it's a 3hp and may have been made by Westbend Also it's lime green in colour<br />Cheers Joe
  15. C

    year of motor

    Hi all Does anyone know what year this motor is?<br />The model number is 1358 HB I was told this is a racing motor and would like to restore it <br />Anybody know where I could find the exhaust stacks. Cheers Joe
See more
Top