I tried a 4 blade 14.5”x 20p and a high 5 21p. The 4 blade was running about 5200rpms on a 5.0 gxi and the high 5 was at 5000-5100. The high 5 did wonders and felt smooth. I am a little high for the wot rpms at 5000 being the max. Should I try to find a high 5 23p or call it goood? Thanks
Volvo 5.0gxi with a 3 blade stainless 14x19 currently. The engine will hit the governor at 5000-5100 rpm at 47 mph gps checked and I still have apx 1/4 throttle left so I am unable to find my wot. We tow and cruise mostly. I want to take advantage of the remaining power and was thinking of a 4...
I am looking to replace the 6 nuts that hold the out drive on. The dealer I use is an hour away and told me that a stainless lock nut from Home Depot will work. I took an old one off and it appears to be aluminum? Does it matter? I have read 25 and then 50 # of torque but I can’t seem to find...
Just got done rebuilding a 2bl mercarb and fired it up. The fast idle screw binds up the choke plate. I’m sure it’s something silly. When I adjust the screw to where I need it as far as idle, it won’t allow the choke plate to move. Thanks
89' 4.3 with a 2b carb. At idle on muffs runs rich. I'm at 4200'. I trolled for 10-15 minutes and went to relocate but it was flooded out. Ran it up to wot to clean it out and ran fine the rest of the day. New carb time? Rebuild? Switch to a 4b or is it worth it? Or leave it alone. I won't be...
I picked up a spare prop that is older and has never been used. The front of the prop bottoms out. I have an extra thrust washer and when I double them up it seems to be enough of a spacer. Instinct tells me not to do this but......
Alpha 1 gen 1 trying to put a Michigan prop with the hub built...
1989 4.3 merc. New plugs cap and rotor. Timing is on. I was running a slightly chewed up 14x17p 3 blade at 4700 rpms at 37mph. I found a great deal on a 21p high 5 and got 41mph at 4400 rpms. The high 5 had great acceleration and handling. Am I too low on the revs? Re-jet the carb for my...
I have a 1989 18' Glastron futura 185. It has a 4.3 in it with a 14x17p prop. At 4700rpm's I'm at 37mph gps checked. After reading through other threads it seems my top speed is low. Can anyone chime in? Thanks
