I just got a great deal on a Sunbird corsair 218 cuddy, only catch is that the 3 front the windshield glass pieces (flat & square) were broke last winter. My question is, should i replace them with tempered, plexi or just safety glass? I'm not sure how thick to order it as none of the old glass...
Just removed all the old Imron paint from my boat (topside). I'm going to prime it with Interlux two part prime coat. Is it necessary to remove ALL the old primer prior to repriming and painting? I will finish with Interlux perfection.
I am swapping out my V/P 280 for a later model SX, reglassing the transom. Does anyone have a template or height guide for optimum speed performance? I know the higher the unit the less the drag, but what is too high. I've measured my old outdrive and recorded the distance, should i just use the...
I've currently got my outdrive (including all transom and power trim components) listed on e-bay. I need a rough estimate of the weight/overall size of the assembly for shipping purposes (freight calculator). I am keeping the drive in the boat until sold, so it's hard to gauge by standing in my...
While i'm installing my new floor... I will be re-glassing my transom for an outdrive upgrade. i'm swapping out my v/p 280 for a late model sx. Has anyone ever done a refit like this (pics or a link would be great)? If so any advice would be appreciated
Found a squishy spot near the transom when i pulled the rear seat out, did a test drill and found out i have dry rot! The entire floor is fiberglassed from bow to stern.. I believe i'm going to have to remove all the fiberglass and replace all the decking/stringers/foam. Has anyone used Trex...
Rookie has a few more questions...What effects will increasing from a 14" to a 15" have on a v/p280???? I'm sure it will move more water, but will it strain the drive? I'm currently running a 14"x17p (45mph @4700rpm) 4000# boat medium load (4) and am looking for more top end. I'm thinking...
