i have just picked up these motors, tiller steer short shaft both ex rnli. (lifeboats)
Just wondering which outboard will be best to keep, the old one is a yamaha based motor and been well looked after, the 1998 has stood for a while and the tilt has seized so looking to get that undone asap...
i have a z10 gemini, and a 25hp yr 2000 M25C tohatsu.
have just mounted the engine normally, outboard bracket sitting on transom.
lots of splash from the engine, looks very inefficient.
the water level is hitting the square section of the lower leg and the shifter gear rod.
I have read...
Hi
I have just got a z10 zapcat and trying to fit the floor boards for an outing tomorrow.
Starting with the back board.
cant get it under the runners on each side and there seems to be no way of prizing them up by hand and am very reluctant to use any tools as its an infaltable boat.
It looks...
hi
i am trying to find the year of manufacture for the following serial no
6e9s010155
Been told it is a 40hp MS tiller standard shaft
looks to be late 80's in design.
any help would be appreciated and any experiences with this motor good or bad, or common problems??
Anyone know how much it...
I have a year 2000 2 stroke tohatsu 25hp.
Its the m25c model
I was out in the boat for about 2 hours and it developed a problem when trying to put into neutral from forward gear the prop was still spinning, i think it was reverse in fact.
Before you say it...no i hadnt knocked the gearshift...
does anyone know the ht lead resistance readings for this outboard?
i have 2 very different readings from my 2 ht leads and am trying to diagnose a misfire.
When i pull the leads off the plug when idling i get a big shock!!
thanks
Can anyone give me any contacts for buying tohatsu spares in the uk
My 25hp 2 stroke year 2000 tohatsu died on sat whilst out on the estuary. Turns out no spark was getting to the plugs so i was thinking i would need to replace the coil and/or cd unit.
After closer inspection it turned out to...
hi
just after any advice/experiences with the zodiac futura with the speed tubes under the main tubes?
I have a bombard commando C2 (3.5m max 25hp) with a fold out wooden keel under the aluminium floor boards. It gives a very solid base for a SIB.
I have to have a sib for storage purposes but...
hi
i have heard it possible to uprate a 9.8hp mid 90's mercury to 15hp as the only difference is the carburation?
is this right and what needs to be done exactly!!
thanks for any advice in advance
hi
i have a 2000 year 25hp Tohatsu 2 stroke, short shaft tiller outboard.
Does anyone know the standard prop size that would be on that model ?
Also i am looking for a spare prop to buy, does anyone know whether this one on ebay would fit?
Was thinking its better to have any prop incase of...
Hello all
I have a 25hp tohatsu 2000 model 2 stroke.
she makes quite a clanking noise going into gear. reverse worse than forward.
once in it is gear it is fine but the noise sounds like metal against metal.
I got the engine out today and it leaked some watery/oily gunge from the prop /skeg...
hi
i have just bought a 2000 model tohatsu 25hp and have seen on this and other forums that its possible to uprate them to 30hp.
i followed some threads but the final results after fettling with gaskets and timing werent posted.
I had a look down the venturi tube and cant see the small gasket...
my 1985 25hp Evinrude 2cylinder 2 stroke is a bit difficult to gradually reduce speed .
It accelerates very well but when trying to gently reduce speed to match the speed of waves as i come down the face of them nothing happens as i decelerate then suddenly the power drops right off and i have...
Hey all
I have a 25hp Evinrude 1985 and have the opportunity to purchase a 2001 mariner 25hp
Just after thoughts or which one is considered better, due to reliability, maintenance, durability power/torque etc
obviously one is alot newer than the other, just after some advice from any...
hi
i am looking at buying a mariner 25hp serial no
ot224429
if anyone can let me know what year it is and if possible what site they use to find out that info that would be great.
I looked on the maxrules site but they only go to 1996 and the serial no didnt match any of their info
thanks