damo79's latest activity

Since I was checking the valve springs, I also verified the valve timing. For cylinders 1 and 4, the intake valve pushrod lift begins at...

In post #149 you mentioned that maybe I have overloaded engine - wrong prop, gear ratio, engine misalignment. Is it anything else I can...

I checked what you asked for with Diacom recording. Checked graphs, looking at demand, rpm and trim. From what I can tell optimal max...

It's not OEM lube its Motul Translube Expert 75W-90. I have garden hose and earmuffs I normaly use to run the engine to operating...

Unfortunately the boat is back on trailer, my 2 paid months in local marina are over. Wish I tried that test on idle when the boat was...

I don't have the time right now to spend the time I need, hopefully tonight or tomorrow. I do have a couple of questions for @tpenfield...

@muc Please take a look at my recent Diacom test run. I did it using an external fuel tank. It was mailny test of WOT and playing with...

O2 sensor was replaced with new one. Before I got Diacom, the engine was checked by a marine tech and the only think he told me was that...

System voltage still drops to 10.2V. Checked @tpenfield files and both his V8 engines do the same while cranking. Maybe that's normal...

@muc please see attached recent Diacom test run with new battery. Old one wast tested and it was time to replace it. Capacity was still...

Seems strange that Bayliner states that boat was sold with engine currently installed and you found out that thia engine was warranty...

Never thought about that. Asked Bayliner and that's the info I got. Replaced battery but the weather wasn't good enough to run ang tests...

Typo - my bad again Turning Point was 14.25x21". And yes Ballistic has clipped blade ends.

Sorry my bad it was 2" from 14.25x19" Turning Point 2150211 that was on the boat to 14.5x19 SS Balistic...