So, I launched my 27ft Bayliner 2750 boat on Friday afternoon all loaded up in anticipation for the 4th of July. We cruised on out to Mariners Basin in Mission Bay, San Diego. We dropped anchor and were going to just chill out there until tuesday morning. Everything was all and well until about...
Hey People. I just rebuilt my Merc 350 in a Bayliner 2750 Victoria (27Ft.) It ran great. I went to launch it to test it out and as I was adjusting the idle my screwdriver touched the coil and I assumed shorted it out. I lost all power completley. My battery gauge doesnt even work when the key it...
Hey People. I just rebuilt my Merc 350 in a Bayliner 2750 Victoria (27Ft.) It ran great. I went to launch it to test it out and as I was adjusting the idle my screwdriver touched the coil and I assumed shorted it out. I lost all power completley. My battery gauge doesnt even work when the key it...
Hello People, <br /> I'm a "do it yourselfer" here and I need to Check to see if my Exuast Shutters are ok. Usually, on a I/O Vovlo SternDrive where can the shutter/s be found? Once found, is there anything special that I should look for to check servicability?<br /><br />Thank you for your...
Hey ladies and Gents. I have a 79 Bayliner Victoria (27 Ft.) I just rebuilt the engine recently now I am trying to put it back in, the only problems is that I cant get the Flywheel to attach to the pinion gear on the stern drive.<br /><br />Am I missing something? Maybe a trick or two on mating...
Well, I couldnt get my engine to turn over and I got a little emotional so I just yanked out that Merc 350 and will begin the rebuild process. Let me be the first to say its no party getting that heavy old thing out of a boat that stands 12 feet tall on the trailer. <br /><br />I'm thinking of...
Hello there ladies and Gents. I have a carburated chevy 350 inboard that wont turn over. I just got done tearing apart the engine to replace seals within the motor. I put it all back together and not it wont start. The fuel pump is working and its getting gas because its backfiring back up...
I took off one of the exaust manifolds and out shot a ton of water from the exaust ports. The manifold/riser gasket was almost gone so I wasn't suprised. I will replace that, but I was wondering about the risers themself. They are rusty on the inside, but theres no damage to the mating surface...
When I walk down in my cabin the aft room smells really bad of Gas. I opened up a floor panel and found there to be about 2 gallons of gas floating around. Plus, its leaking down under the engine and when I pull the plug after taking it out of the water there is a brown fluid that comes out. Do...
Ladies and Gent's, just wondering as to if there is a specific channel on the radio designated for boat chatter/radio checks. Sort of a "Local Channel" type thing. <br /><br />Thanks, <br /> Chris
