1) Performance issue you are trying to correct. Low RPM at WOT, it is currently running about 4400-4500 rpm
2) Current prop manufacturer, model, aluminum or stainless as a minimum. Solas rubex aluminum
3) Current prop diameter and pitch (required). 11" 15...
I have a Force motor with the serial # 0E022160. I would like to confirm what year it was made and I also would like to know what the proper Wide Open RPM is for this motor.
thanks
I am in the market for a new fishfinder. I only fish fresh water mostly 50 ft or shallower maybe once a year fish a lake where I might go as deep as 100ft.
My question is will a 2000w fish finder be high enough power for my application. Will it be able to tell the difference between fish and...
I have an old mercury outboard trolling motor a guy gave me and I am trying to figure out year and HP. I am pretty sure it is a 4 hp. It is a 1 cyl. I can't find a serial number anywhere on the outside. By the spark plug I found this number 1016-2394. On on side where the vacuum hose connects...
18ft aluminum 1973 starcraft, 1998 120hp Force motor WOT rating 4750 to 5250, I currently use a Stainless 18 p prop that is CUPPED. The motor currently runs at 4850 RPM at 32mph. The cavitaion plate on the motor is right at or just a hair below the bottom of the boat. I was thinking of trying an...
I have a 1973 18' starcraft aluminum boat and a 1998 120hp Force motor. I am currently getting 4800 rpm at WOT and about 31-32mph. I have a stainless 13.25 dia 18 pitch cupped prop. I was thinking of going to a 17 pitch prop and want to know if there is really any advantages in my application to...
