Recent content by docksider

  1. D

    Johnson 35 hp '81- no tell tale stream in test tub

    I just started my Johnson 35 HP (1981) for the first time in two years. As expected, it started right up, but I didn't see any stream of water flowing from the tell tale. I can't remember if this is typical at idle or if it is truly an indication of impeller or water pump issues. I suspect the...
  2. D

    Does alum boat seam filler shrink and swell in old boats?

    There is that (usually black) material along major rivetted seams in most aluminum boats. In older boats, to what degree does that shrink when dry for a long time and swell shut when placed in the water. It seems I've noticed a bit of that temporary leaking in one of my old boats, all of...
  3. D

    Johnson 2004 9.9 4 stroke advice

    I've spotted a pretty good deal on one of these 9.9 4-strokes, but wonder if there are any concerns-- e.g., issues to consider or look for. I know the company has experienced a lot of transitions and don't want to be stuck with an orphaned product.
  4. D

    5.5 Johson '57 lower unit issue

    I recently used this motor for the first time in a couple of years, then hung it on a rack in the garage. Beneath the lower unit I noticed a bit of lower unit grease and some water on the floor. It seems to be coming NOT from the plug screws used for changing gearcase oil, but from a phillips...
  5. D

    two line tank leaks

    I have two 2-line tanks for my 1955ish 5.5 Johnson. (Ser 1561027; Mod # CD-14). Both have pin-hole leak(s). One also has some rust. The mechanisms, pump button, gauge, cap, line connectors, are all fine. Does anyone sell a replacement tank, or an generic tank to which my Johnson "plate"...
  6. D

    carb draining

    So, with a bunch of small outboard and yard machines, I'd never drained a carborator until this year, when I followed the clear instructions on a Yamaha generator for how it's done. I've always used Stabl and run the motor dry. Now that I've drained a carb and seeing where the manuals suggest...
  7. D

    convert 15 2 stroke yami to remote

    I have 15 hp, 1998 yamaha 2 stroke, tiller steer. I'm thinking of moving it a boat with a wheel. Can this motor be converted to remote control (speed, shift, steer)? If so, any idea of cost? thanks, d
  8. D

    60 second WOTs during breakin Tohatsu

    As my motor (9.8) makes its way north from Tampa on the Fed Ex truck, I anticipate the break-in and preview the on-line manual. Between 2 hours and 10, one minute WOTs are "allowed" every 10 minutes. Are these allowed or encouraged? It sounds like they know some will find WOT irresistible...
  9. D

    battery for 9.8 Tohatsu

    I'm planning to get a 9.8 tohatsu. I like to power lights and a bilge pump, so I'm thinking of getting the electric start, which comes with the alternator I'd like to use to keep the battery charged. I'm putting this on a 12 boat and need to save weight/space. Will a small tractor or...
  10. D

    Yamaha & Tohatsu 9.n HP

    I noticed Yamaha has followed Tohatsu's lead in making a lighter 9.9 HP 4 stroke. Any feedback on their 9.9 entry? Or how it compares with Tohatsu/Nissan/Merc?
  11. D

    9.5 hp rubber mounts

    Has anyone had to replace the side or center mounts in a 9.5? How difficult? I have at least one bad mount. Dealer isn't sure it's worth opening up to see given the complexity of the process and the price of replacement mounts, especially if there's more than one broken. Motor is a 1971...
  12. D

    07 vs. 08 Tohatsu

    I've heard Tohatsu is coming out with a 20 hp in 08. Are they any other changes in HP, spec. or design of the smaller HPs, e.g., the 9.8, for 08? Not exactly maintenance/repair question, but could be if new designs or specs are to fix a problem with current model. dock
  13. D

    Tohatsu 18 trolling speed-idle

    I've been giving thought to getting a Tohatsu 18 for my 14' Smokercraft Alaskan. I do quite a bit of trolling for lake trout, so steady idle and slow speed operation are important. I tried a friend's new 18 (his has remote control/steering) and found the slowest it would go on his slightly...
  14. D

    Tohatsu/Nissan Service

    Will Tohatsu dealers do/honor Nissan warranty and vice versa? Does this apply in Canada as well as US? I'm thinking of getting one of these and wondering if I need to get the label sold by the marina I'd have to use when I'm in Canada. Thanks, dock
  15. D

    slowing down a Yamaha 15 HP 2-stroke

    We use two small aluminum boats at the lake. The larger has a (1998) 15 yami and the smaller one an old 9.5 evinrude. I was thinking of getting a new 9.9 4 stroke for the smaller boat when wife suggested getting new 15-20 4-stroke for the larger boat, which we use more often, and moving the 15...
See more
Top