Update, put another coil plate on it, and the brain box, new used. It maybe ran a little better. The prop is a 19 pitch and I have added a lot of weight, anyone feel it's a prop issue?
I did some reading and I think 8, but the mechanic said I need to set it for 12, and I haven't pulled it out and changed it. I think now it won't go above about 2000.
Got another question, I put a different console with a tach and hooked it up, well I have it on the wrong setting and rpm's aren't reading correct, can or could that affect the way the engine runs? I wouldn't think so but had to ask.
Update, mechanic said he may have found a coil plate and box. Good thing cause I cranked it today and it doesn't want to idle. Pull the fast idle up and it runs, put it down about halfway and it dies. SMH
It does seem to be a fuel issue since bumping the choke helps it. I think I will put muffs on it and spray each carb with cleaner and if it picks up I will clean that carb again.
Thanks pvanv I was wondering if I needed another flywheel for the coil plates I had. I put everything back together with old parts and fired it back up. Tohatsu guy said it might be a sensor, but more than likely still carb issue. He said with it running spray WD40 in each carb and if they...
Matt, I just went out and looked on right side of motor, the reddish looking plate has 3B7-1 19588 That is all I can find for serial number. I just ordered from Tohotsu us part number 3B7061602M it was $348. I hope this is the correct one. This has sure been a mess. I got second coil...
