Joe, I wrote you a couple of weeks ago about a clutch dog for a 1972 65hp evinrude triumph with hydroelecrtric shift. you then said you had one in stock and it would be $64.00 please let me know if you still have this and what the total price would be including S&H please e-mail me at...
Joe, I have put a couple of posts on here concerning my 1972 65hp evinrude triumph not going into neutral or reverse. You gave me some info on checking the Solonoids I found the problem in the wiring harness got that fixed. Thanks alot. Then I changed the lower unit oil (with an oil that said...
I have a 1972 65hp triumph I changed the lower unit oil and it ran fine for about an hour.then it started popping in and out of gear. I searched the message boards and determined the problem to be the clutch dog and forward gears so I disassembled it and turned the clutch dog over. I took it out...
I would like to know which brand of manual would go into the most detail for rebuilding lower unit on a '72 evinrude 65hp. I see that there are several manuals for this particular motor thanks in advance
I have a 1972 evinrude 65 hp motor with the hydro-electric shift mechanism It pops in and out of gear at anything more than idle speed. it only does this in forward (not reverse) It is designed to default into forward in case of trouble with the solonoids so I disconnected them to eliminate them...
I have a 1972 evinrude 65 hp motor with the hydro-electric shift mechanism It pops in and out of gear at anything more than idle speed. it only does this in forward (not reverse) It is designed to default into forward in case of trouble with the solonoids so I disconnected them to eliminate them...
OK....thanks for everyones help on the forward and reverse. got that fixed.....Bad Plug on wiring harness... So I took it out today and it ran fine for about an hour then while tooling along at half speed it popped out of forward. I got off of the throttle before it slammed back into gear...
OK....thanks for everyones help on the forward and reverse. got that fixed.....Bad Plug on wiring harness... So I took it out today and it ran fine for about an hour then while tooling along at half speed it popped out of forward. I got off of the throttle before it slammed back into gear...
Does anyone have or know where to find a Schematic drawing for the assembly of the lower unit for a 1972 65hp evinrude....Please Help or e-mail me thanks in advance and happy boating to everyone. I would really like to know what is insode it before tearing it apart
Thanks Joe Reeves for your info. I have checked the solonoids and the push button swith they all seem to be good but it does not shif. Is there something that could be clogged or gunked up keeping it from shifting? Please help
Thanks Joe, <br /><br />I have been able to check the switch and it did work just fine. The shifter worked just fine then it sat for a yaer in a shed at my inlaws where it was knoked over on its side. I don't know how long it sat this way. could this clog somthing? Also I took the cover off of...
My 1972 65HP evenrude is stuck in forward. I remove lowerunit and removed coils. Both seem to be good. even with coils out it is still in forward please help. :confused:
