Recent content by elwilliams13

  1. E

    1991 e225pxeic no spark.

    Hello fellas, Figured i would ask on here as i am out of options here. I was running full throttle one fine day when i noticed my gauges all went to zero as if the batterry switch or ignition was suddenly shut off. That wasnt the case so i started looking around and discovered that battery...
  2. E

    1991 evinrude 225 no spark.

    my OB had one bank that was not firing after stat up. Determined it was the power pack so put in new one. It started a few times and then no spark at all. I was testing the new pack per the manufactures instructions and it says to check the stator resistance. It says I should have 1000 ohms from...
  3. E

    1991 Evinrude 225 No spark

    went out one day and all of the sudden the engine slowed down and quit. Checked things out and one of the battery lugs came off. Once at home turned her over would idle for 2 min and then would drop the right bank. Checked for overheat, disconnected shift interupter and nothing still did it...
  4. E

    Merc carb situation

    3.0L Mercruiser 2 barrel carb. Boat not run in a while. Mechanical fuel pump. Rebuilt carb and when put in it was overflowing. Adjusted float no more overflow. Now it drips from the arm in the middle of the venturi(Forgot what they are called.)on the right one but not the left. During rebuild I...
  5. E

    Electrical problem

    1991 evinrude 225. Went out on the water when I was running WOT. Noticed my instruments on the dash had all zeroed out(no power.) Then engine began to lose rpm. Upon investigation found that my battery lug had popped off. Reattached it and could not rev up past 2000-2500 rpm. Got home and put it...
  6. E

    Where do I begin?

    1991 Evinrude 225 e225pxeic. Went out today was running fine all of the sudden engine rpm dropped to about 2500 no alarm and temp gauge was in the 130 range. Thermostats recently checked and work. Upon arrival found a small leak under the carb cover goin to the last carb on left (#5) was running...
  7. E

    wot timing

    Got a 1991 evinrude 225 and can only get to 4000 rpm with my boat 1979 mako 235. I was wondering if a decrease in wot timing can limit my rpms this much. It worked fine when I got it. Did the 4 degrees timing method set at 14 because spec is 18 BTDC. Now I am lost. Need some more info. All...
  8. E

    Fuel pump

    Does anyone know if VRO pump Part #438090 belong to a 1991 Evinrude 225 model# e225pxeic. I can't find the number anywhere in the owners manual.
  9. E

    vro2 pump number

    I found a 4 wire vro2 pump in my garage and have fixed or owned so many outboards that I forgot which engine it belonged. My library of part books and service manuals where destroyed by hurricane charlie. So I need a little help the part number is 438909 and would like to know what model years...
  10. E

    VRO size

    I was wondering if all VRO are the same? I run the one on my 1991 Evinrude E225pxeic and recently found one that was on my 110, It has the four wire lead but do not remember the year. They look the same and heard somewhere that they are interchangable you just can't change the springs, they are...
  11. E

    Warning horn.

    Can someone help me out with the part number to the warning horn for a 1991 evinrude 225 model E225pxeic. I recently lost my horn and my parts book.<br /><br /> Ernie.
  12. E

    Flywheel

    Evinrude 225 1991 flywheel has 583970 etched into the side followed by 03/25/1997. Is this the correct flywheel for this engine am having trouble starting it. Can get it to wot advance using all of the adjustment screw. Any help please I am lost.
  13. E

    Part number please

    I am having trouble with a part number for a 1991 Evinrude e225pxeic 225 horse. I need the oem starter solenoid number. Any help would be greatly appreciated.<br /><br /> Thanks,<br /><br /> E.L. Williams
  14. E

    Timer base trouble

    My 1991 evinrude 225 timer base is kind of stiff, Is it suppossed to move freely it is not comming back down against the idle screw when I throttle down. Was wondering if removing flywheel and a lubrication, cleaning, and inspection might help my problem? Any help would be appreciated.<br /><br...
  15. E

    VRO Tank

    Does anyone know the part number for the oil tank 1.8 gallons for a 1991 evinrude 225? I have one but not sure if it will work. Pn 17500
See more
Top