Current visitors

Home
Members

ESGWheel's latest activity

ESGWheel replied to the thread Cross country trailering advice/tips.

Short answer is yes, longer answer is it depends. First off, I would look to see if there is grease flung all around (rear seal so look...

Apr 9, 2025
ESGWheel replied to the thread Cross country trailering advice/tips.

Here is how i do it > when towing my boat: at every stop for gas or whatever, before I do anything else I walk completely around both...

Apr 9, 2025
ESGWheel replied to the thread 4.3 efi tbi throttle question.

Kallen, Boy this is a headscratcher. Here is a recap to help me understand what I think is your situation followed by a recommendation...

Apr 9, 2025
ESGWheel reacted to Guffer's post in the thread Mercruiser 120 poor starting with Like.

Super helpful. I have no access to the boat this week but will get back early next week and I’ll work through each step. Many thanks!

Apr 8, 2025
ESGWheel replied to the thread no oil after cylinder head recondition.

Thanks gents... filing it away now...

Apr 8, 2025
ESGWheel replied to the thread no oil after cylinder head recondition.

Not trying to get off topic but rather to learn: do most (all?) marinized GM motors use roller lifters? Perhaps that there was a cutover...

Apr 8, 2025
ESGWheel replied to the thread no oil after cylinder head recondition.

Just a word of caution and perhaps this is old school thinking and not relevant but when replacing only lifters and not the cam, need to...

Apr 7, 2025
ESGWheel replied to the thread No water coming out of the exhaust on muffs.

The thermostat does not need to come open or be bypassed for water to enter into the Exh Manifolds and out the exhaust. See this post...

Apr 7, 2025
ESGWheel replied to the thread 4.3 efi tbi throttle question.

Does this prop have a center hub that can ‘let go’? (Shaft spins but prop less so). While I would expect to rapidly deteriorate, check...

Apr 7, 2025
ESGWheel replied to the thread Mercruiser 120 poor starting.

You’re welcome and before we get going, I am glad you are taking advantage of this forum. There are a lot of great contributors here...
Apr 7, 2025
ESGWheel replied to the thread Mercruiser 120 poor starting.

Guffer, if I may, I am going to suggest a different approach but will address a possible ‘cleaning’ method at the end for your pickup...

Apr 7, 2025
ESGWheel reacted to 1tman1's post in the thread Prop Question... Bayliner BR185 with Like.

Thanks for all the advice team... Going to recheck WOT rpm in a week or so when back with the boat... And will go from there...

Apr 6, 2025
ESGWheel replied to the thread Carb rebuild question.

Scott, Nice listing :) However, I could not find the OPs in the listing nor on the Holley website which is also full of great info...

Apr 6, 2025
ESGWheel replied to the thread Prop Question... Bayliner BR185.

Concur with Scott > go to a 4 bladed. I had a similar use / profile as you when bought the new to me boat (Larson 228 LXi) some years...

Apr 6, 2025
ESGWheel replied to the thread Piston Rings don´t fit, too little clearance, sits too tight.

For my benefit here is a recap of your situation > it helps me think thru things :) Doing a rebuild on engine > only honing cylinders...

Apr 6, 2025

Show older items

Home
Members

Top