Hi, I have a 70hp Mariner about 1983, In order to get gas to the motor I have to unplug the fuel line from the motor and put a screwdriver in to allow the gas to come out when I pump the suction ball. Then when I plug it back into the motor it will run. Thinking something in carb or such not...
Mabye I missed this but had two questions, How did it work out putting down gelcoat first where you extended the hull then put down the poly and matting? and how did you repair the holes to the hull where you screwed down the forms for the extension? Thanks in advance for the answer.
I have a 70 hp mariner outboard on my 18' fiberglass starcraft. I had some problems with the motor once and although that is fixed now I would not like to be farther from the launch without a motor again. There will be more repairs I'm sure.Would it be a mistake to put two motors on this boat...
I have a 17' fiberglass starcraft that I need to rebuild the transom on, I will need to cut the top cap to do this and while it is off I could modify it. There is a 18" splash shield on the boat now, would I be able to permanently remove this or narrow it without major consequences? I am...
In the hull extension thread oops mentioned he was repeatedly warned away from Epoxy in his extension and I wondered why? I am considering lengthening my 1962 starcraft cabin cruiser fiberglass boat 30 inches as the floor and yet to be checked transom need to be repaired/replaced so I have...
Hello, I have a Johnson Seahorse 5.0hp 809913 tn-26 and would like to know the fuel oil mix ratio, and if finding another prop is possible. Also a manuel on this motor. Thanks
