hey guys i have a 454 with a bravo drive, previously i had an alpha and converted over to bravo changing out everything, anyways i baught the new engine coupler and the drive wont go on, i aligned the motor with the alignment tool and that fits perfectly smooth and good spline marks, then i took...
hey guys i just baught the Attwood Sahara 500 bilge pump and it was complete garbage.. barely any pressure comming out of it.. i was wondering what a good pump would be.looking to get somewhere around 800gph. i need it to be 3wire also.. Thank you.
i have a 88 sea ray sundancer 268 with 7.4l 454merc with bravo one drive..i was cruising along the other day and lost my gear. didnt hit anything (i dont think)..boat still revvs up and runs no problem.. when i put it into gear theres nothing... when boat is off i have forward and reverse the...
hey guys i got a 88 sea ray sundancer 268.. 454 merc 7.4l with alpha drive with 4blade prop.... i feel like its not getting top speed it should be getting as people say. at 3500 rpm in not even at 20mph and cant get on plane... about 4500-5000 rpm ill be on plane at 25mph and then full throttle...
hey im looking to put new speakrs in my boat.. i seen the pyle hydro pro ones in my budddies boat and they sound good.. r they good speakers? any other brands that are really good?
i have a 88 sea ray sundancer with mercruiser 454 7.4l v8 motor. and alpha drive, anyways when i idle theres no overheating, but i open it up 3500rpm-4000rpm for constant 25-30 min.. the temp gauge creeps up to around 200-210 and the max is 220.. now i believe that is too hot., then i back off...
hey guys i have a 1988 sea ray sundancer 268 with a 454 mercruiser 7.4L v8... what shud the temperature gauge be reading during normal cruise 25-30mph. 2-3 people in the boat.?
hey guys i have a 1988 sea ray sundancer 260 with a 454 v8 7.4l mercruiser with alpha drive... i have a wierd rattle noise comming from/sounds like around the risers/manifolds near the transom. anyone know what this could be? thanks.
hey guys.. my buddy has a 95 mercury 60hp outdrive.. we hooked up muffs (very little water pressure)-garden hose with bad pressure)... and there was no water comming out the top spout. so we checked the hose inside the cover and its completely cleared. no clog. then i checked the impeller and it...
hey guys i have a 1987 mercruiser 165hp with alpha one drive, im about to reattach the drive back onto the boat but just wondering how the shift shaft is supposed to sit.. i know in forward gear but the shaft on the boat and one on the drive.. which way is forward ? anyone with pics?
hey.. i noticed a lot of boats around me make a beeping noise right before their boats start when key is in the ON position.. (kind of like a diesal truck with their glow plugs)... i have a 1987 sea ray seville 165 mercruiser alpha one drive.... i was wondering why mine doesnt make that beeping...
hey im installing new trim limit/senders and its a two wire .. does it mater which one is positive and which is negative? in the pic is where my new wires will attach to the old wires but one is taped red (for positive?)
hey guys i was going to replace my exhaust bellows and noticed i have a hole on the underside of where the bellows would connect to .. im not sure maybe the new bellows would cover it? or should i leave it alone? or JBweld something in place? im iffy with jbweld bc if it falls off then it might...
hey guys currently i have carpet and i hate it.. im looking to replace it with vinyl.. i seen on overtons they have MariDeck vinyl flooring and cabelas has a Marine Standard vinyl.. in both pics they look familiar. i do have marideck samples and i like the way it is. i was wondering if cabelas...
hey i have a 1987 mercruiser alpha one drive. im trying to replace the trim limit/senders and i get to the point where it goes through the transom.. i have two bolts holding it in as described in ling http://www.mercstuff.com/trima.htm at number 8 and number 1... it only shows one bolt. anyways...
