I have recently rebuilt my '98 90 degree looper motor. I rebuilt all 6 carbs as well. I have new plugs and everything seems to be in order. I have fuel, spark, and compression. I also set the WOT timing and its dead on. Link and sync has been done as well. The absolute max RPM i am getting is...
I have recently rebuilt my '98 90 degree looper motor. I rebuilt all 6 carbs as well. I have new plugs and everything seems to be in order. The motor starts and runs for just a few seconds and cuts out. It is backfiring and seems not to be running on all cylinders. I have never messed with...
Just rebuilt my 98 200 90deg looper. Fresh pistons rings and bearings. Not a bad job at all expected worse. I have a timing question though. The flywheel will only go onto the crank one way and there is nothing that is adjustable except that that motor could be 180 degrees off and i would have...
I have a 1998 90 degree looper v6 200hp...Lost a piston due to dowel pin migration....am looking to bore the whole thing 20 over but am concerned that the cooling may not be up to par....also wondering if the carbs will need to be rejetted or possibly upgrade to the carbs from the 225...
Im in the process of rebuilding my 1998 200 ocean pro. A piece of my piston broke off and chewed up the head and scored the cylinder. Im wondering what else i should replace while i have the motor ripped apart. I know im already in for a new piston and ring and a new head and gasket set. I...
I took my boat out last night for a fishing trip and on the way in the motor started making a loud knocking noise. It still runs fine even gets up to speed nice. I got it home checked compression and top left cylinder is around 70 the rest are all over 100. I pulled the head and its a MESS...
