Recent content by ggreen

  1. G

    gps mapcreate

    I live in Canada and just purshased mapecreate 6. I have noticed that there is a mapecreate 6.3. My question is how many years are between the two versions? Did the dealer sell me a out dated version to clear his shelf?
  2. G

    I keep on blowing a fuse and frying my gps

    Every time I plug my gps adapter into the cigarete lighter on my boat I blow a fuse in my gps. The fuse is located in the adapter. It fried my second gps. Luckly the dealer replaced both. I don't feel three times lucky, so I need help.<br />The cigarete lighter is attached to a 12v starting...
  3. G

    to much oil and gas mixture.

    What would happen if you put to much oil into the gas? I am using a 50:1 ratio. I mixed oil with gas in a spare tank, my son thinking that the tank just contained gas added more oil. We haven't used the spare tank yet. Should the gas/oil in the spare tank be thrown out (by proper means) or...
  4. G

    Head gasket blown

    The motor is a evinrude 30 hp 1990. I got a call from a mechanic indicating that the impellers on the water pump are melted, needs a complete water pump it. The head gasket is blown (due to heat build up), the pressure in my cylinders is 60 lbs. and that I need a neutral start switch. He...
  5. G

    Milky oil, past pressure test, Attn: Dhadley

    envinrude 30 1995, I checked my bill and it states that a pressure test was done for 2.5 hrs and a vacuum test for 3.5 hrs with no leaks. I also changed the orings on the fill and vent screw this spring. The gear case oil still comes out milky.<br />Another problem: I ran the motor for about...
  6. G

    lower unit past pressure test, oil is still milky

    I run a evinrude 30 I believe the year is 1995. I have had the lower unit pressure tested twice at a marine. Both tests passed, however after a day of running the motor the oil comes out milky. I metioned this to the mechanic after the fist test. Problem not resolved. Any ideas what could be...
See more
Top