Recent content by Glastron Fisher

  1. Glastron Fisher

    Mercruiser 7.4 top end issues

    so long story short i pulled my engine two seasons ago due to a cracked block. Got a new used engine with forged internals and put her back together, drained and refueled. Won’t go up on plane, hits 3,000-3,500 RPMS and is boggy, if i throw a few guys up in the bow or go out solo it will get on...
  2. Glastron Fisher

    Kawasaki 1100 top end issues

    hey guys i got an issue. Customer dropped off a Kawasaki 1100 jet ski because it was running rough on top end. I’ve been tearing my hair out trying to figure this thing out. Compression is 105,105,90, CV carbs have been cleaned 3 times now, spark plug wires trimmed back, new fuel lines, new...
  3. Glastron Fisher

    Gen VI 454 interchange

    So i’m in the process of replacing a cracked block on my gen VI and was wondering what block i can use, i’m told a gen V is the same but can’t use mechanical pump? Mines EFI so i’m not worried about that, also i’m having trouble finding my cast number to even verify my block. Doesn’t have the...
  4. Glastron Fisher

    Carlson CSX HIN number location

    I’m trying to run an insurance claim for my boat but i can’t seem to find the HIN location on my 1999 Carlson GSX-21. I know it’s supposed to be on the starboard side of the back of the boat but i am not seeing anything and I’ve searched every square inch i can see. Does anyone have a Carlson...
  5. Glastron Fisher

    glastron carlson engine hatch issue

    I just purchased a 99 Carlson csx-21 and my hatch is disconnected. I don't know how the hinge works. Does anyone have any pictures of how theirs is set up? I think the sun deck was re done and it doesn't look like there's anything to hinge too. If anyone has any pictures of what theirs looks...
  6. Glastron Fisher

    1978 mercury 900 timing issue

    So ive been fighting this issue since I replaced the distributor, I cant seem to figure out how to set my timing at idle, I know how to set Mac timing but can't figure out idle timing, it needs to be between 4-6 BTDC and I've searched the manual but it's black and white and I can't see exactly...
  7. Glastron Fisher

    78 mercury 900 distributor

    What distributors can I use for my 78 mercury 900 6 cyl, I've been searching all winter and the brand new trigger I need is 550 dollars, I'd like to buy one used but don't know what years or hp ratings I can use, I found a 75 85hp 4 cyl. Will this match up to mine if I use my cap?
  8. Glastron Fisher

    78 90 hp straight 6 problems

    Ok so I had posted a thread about this motor befor and I have since solved original problem... Now il starting a new one with a few more issues. I had bought this motor needing a stator and dizzy belt, replaced the belt to see if it runs and have only gotten it to fire but not run. When I timed...
  9. Glastron Fisher

    Need help sealing from water

    So I recently bought a 78 glastron hp 150 bass boat with 90 hp mercury. It didn't come with a trailer ad when we switched the boat over to my trailer I noticed some water went inside the boat. After cleaning the boat I noticed the hose to drain the live wells was loose or broken at the back of...
  10. Glastron Fisher

    My new/first boat need some advice

    So I bought a boat for 200 dollars off this guy. Its a 1978 glastron HP 154. Boat came without the following Trolling motor Seats Prop Batteries Trailer Now for my delema, it doesent run, it's a relatively good shaped boat and hopefully won't need much. But it's said to need a stator and belt...
See more
Top