I have a 2.59 ratio, 21 SS pitch prop and my boat runs at 6000 rpms wide open but only hits 35mph. That calcs out to 24% slippage.
I do have a couple of nicks in the prop but they aren't really bad at all, would that be causing it to slip so much?
Thanks,..
I bought one of these a couple of years ago from iboats and I've only had a chance to use it a few times but already I can't get the green ready light to turn off when stowed.
Anyone know how to fix that?
Thanks..
Some info on my boat
It's an 04 Lund fisherman 1700 with a Johnson EFI 4 stroke 115 hp.
Prop is a Turning point Express SS 13.25 X 21 that I bought from Iboats a few years ago
It runs about 40mph on my GPS turning just a hair over 6k all trimmed out with just me in the boat.
I'm very happy...
I have a 2004 Lund 1700 fisherman. I see that Iboats has a top for my model .
However do they make bimini tops that are specific enough to use the existing connections already on the boat without out having to drill new holes.
My boat has 4 holes with wingnut type bolts for the oem cover that...
I was under the impression that the new 4 stroke outboards need valve inspections.
I have a 2004 115 EFI Suzuki made johnson and I just purchased a Suzuki service manual and it says nothing of valve adjustments, just your basic Oil, spark plugs, fuel filter, impeller ect..
Does that sound right?
I have a 2004 115 Johnson EFI outboard, I don't see any wire that is just comming from the alternator All I see is a wire going right to the battery for charging and starting. So I don't see anyway I can hook up this Guest Battery isolator which requires a connection to the alternator.
What I'm...
I just purchased this Johnson/Suzuki motor a couple of weeks ago and the motor works great except when launching my boat with a cold motor. The motor will run rough and die as soon as I put it in gear so I have been giving it more gas, pass idle speed. Thats kind of a balancing act, trying to...
It starts great runs great when not idling but when idling in gear it surges and dies often. Rpms are about 500 in gear which I think are too low.
Usually when launch I put it in gear and give some power so it doesn't die but then i'm creating a wake in a no wake zone.
Thanks..
I just bought a 2004 Lund with a Johnson 115 EFI 4 stroke, this boat was a repo so I have no idea what type of maintenance was done on this. Is there anyway to tell how many hours are on this motor approx and do these motors need to go to the dealer for adjustments?
Thanks..
I was cruising around the lake at about 4200 rpms and on the 3rd pass I all of a sudden lost 40% of my power, it would plane out and just ran like crap.
After figuring it was some kind of blockaged I check the fuel line, inlet filter, drained gas ect.. but No go so I finally brought it in.
The...